Instruction Manual

IKA

-
WERKE C 7000 Ver. 07 09.07
3DJH
 0HVVDJHVDQG7URXEOHVKRRWLQJ
The C 7000 calorimeter is subjected to stringent quality checks during manufacture,
sh
ould malfunctions occur despite this care, you will find in this section a selection of
corrective measures for dealing with a range of fault situations. Most messages and
fault indications appear on the LCD-display. They should be acknowledged with the
9button. If your attempts to correct a fault are not successful, please contact your
authorized IKA

Technical Service Department.
 0HVVDJHVIURPWKH&&DORULPHWHU
0HVVDJH &
DXVH 5HPHG\
SULQWRXWQRWFRPSOHWH\HW
It is not possible to display a
result on the LCD if the unit still
has a print order to process.
Check that the printer is online,
otherwise wait until the printer has
finished.
FRYHUZDVRSHQHG
WHVWDERUWHG
The cover was opened during a
measurement.
If the cover was opened during the
pre-test period, the same test can be
restarted.
Opening the cover during the main
test invalidates the measurement.
Repeat the measurement.
SULQWHUWLPHGRXW
No data can be sent to the
printer.
Check that the printer is online. Set
the period for a real-time printout
(sub-menu UHDOW) to any value other
than zero.
Check the printer cable.
HQGRIHQWU\
>PHP@ VDYH
Makes you aware that all
parameters in this menu have
been entered. To store the
entries, you must press the PHP
button as soon as this message
has disappeared.
FDOLEUDWLRQWHVW
You have attempted to enter
post-test parameters after a
calibration test. This is not
possible.