Manual

IKA
-WERKE C 5000 control/duo-control Ver. 10 04.07
3DJH
&DUHDQGPDLQWHQDQFH
In order to ensure problem-free operation over a long time, the following mainte-
nance tasks should be performed on the calorimeter system:
6LHYHLQVHUW
&KHFNWKHVLHYHLQVHUWGDLO\ZKLOHUHILOOLQJWKHSUHSDUHGOLTXLG
The entire volume of water in the system is constantly circulated and kept free of
impurities by the sieve insert in the filling sleeve of the expansion container.
This sieve insert must daily be checked for deposits and accumulations of dirt and
so forth.
If clearly visible deposits have become attached to the surface of the sieve, the
sieve must be cleaned. To do this, turn off the device, remove the cover from the
water-filling shaft and remove the filter insert (see the illustration below).
After the sieve insert has been removed, it can be rinsed off under running tap wa-
ter.
For tough dried-on deposits, the sieve can be cleaned with a brush or in an ultra-
sonic bath.
After it is cleaned, the filter insert is placed back in the unit and the opening is closed
with the cover.
• 7KHXQLWPXVWRQO\EHRSHUDWHGZLWKWKHRULJLQDOILOWHULQVHUW$PL VVLQJ
ILOWHULQVHUWPD\UHVXOWLQWKHGHYLFHPDOIXQFWLRQLQJ
• 7KHXQLWPXVWRQO\EHRSHUDWHGZLWKWKHILOOLQJDGDSWHUFRYHUFORVHG7KLV
ZLOONHHSWKHORVVRIOLTXLGIURPHYDSRUDWLRQWRDPLQLPXP