Manual
([SHULPHQWVLPXODWLRQ
IKA
-WERKE C 5000 control/duo-control Ver. 10 04.07
3DJH
e
As soon you have confirmed the data with 2., a dialog box appears for entering the
simulation parameters.
f
You must enter the following parameters:
&YDOXH Heat capacity of the calorimeter system
7HPS'LII The temperature difference at which the simulated combustion is
conducted.
g
Confirm the dialog box with 2.. Using the (YDOXDWLRQ dialog box (See Section 11,
“Evaluating experiments”), you can post-process the simulated experiment in the
normal manner or convert the results into the desired reference state.