Manual

(YDOXDWLQJH[SHULPHQWV

IKA



-WERKE C 5000 control/duo-control Ver. 10 04.07

3DJH

%D2+ The titrated quantity of 0.1 N barium hydroxide (titration of the distilled

water with which the decomposition vessel was rinsed

out after the experiment).

1D &2 Quantity of sodium carbonate that was present in the decom

position vessel (20 ml according to DIN specification; 0.05 N).

+&O The titrated quantity of 0.1 N hydrochloric acid (titration of the

distilled water with which the decomposition vessel was rinsed

out after the experiment).

The modes following immediately below are used exclusively for examinations on

carbon. In addition to the heat of solution from acid formation, they consider the per-

centage of ash, and calculate, depending on the carbon calculation mode, the per-

centage of water from the sample moisture as well as the percentage of volatile

components.

&DUERQ+ LQSXWZLWKRX WWLWUDWLRQ

4([WUDQ Extraneous energy from combustion of the cotton thread or

other ignition aid; 70 J is automatically taken into account for

the electrical ignition energy.

4([WUDQ Extraneous energy from the burning of additional combustion

aids.

+\GURJHQDQ The percentage of hydrogen making up the combustion

sample.

6XOIXUDQ The percentage of sulfur.

5RXJKPRLVWUDZ The percentage of water from rough moisture.

$VKDQ The percentage of ash.

+\JUPRLVWDQ The percentage of water from hygroscopic moisture.

1LWURJHQ The percentage of nitrogen.

&DUERQ+ LQSXWZLWKWLWUDWLRQ