Manual

6\VWHPFDOLEUDWLRQ
IKA

-WERKE C 5000 control/duo-control Ver. 10 04.07
3DJH
cc
Open the &DO dialog box.
Using the button &DOF in the FDOLE dialog box, carries out the acid correction for
the selected calibration. The calculation is dependent on the evaluation procedure
selected:
• Evaluation procedure ASTM D1989, D240, D5865, D4809, D5468, E711
For calibration, a dialog reduced to the acid-correction fields and a shortened
results form are displayed. The comments in Section 11.2 under Point } apply
here too.
• Evaluation procedure DIN/IKA
In the DIN/IKA evaluation procedure, the acid correction to ASTM D240 or
ASTM D1989 can also be used for calibration. The results form is shortened ac-
cordingly. The other calculation modes are not available for calibrations.
The calibration experiments are listed in the dialog box. The columns in the experi-
ment list have the following meanings:
1R Running number of the calibration experiments
&YDOXH The heat capacity of the calorimeter system determined with
the experiment in question
([SHULPHQW The VDPSOHQDPH of the experiment in question
cd
Place the cursor on 6HO with 7DE and confirm with 2. or press the  key. You
have now selected the test for calibration. The test is marked with ”√” on the display