Data Sheet
Ikalogic | SP209 series data sheet | 6
CAN receiver specifications
Max. baudrate
8 Mbps
Common Mode Operating
range
±12 V
Common Mode Input
Impedance
T.B.D.
Common Mode Absolute
max voltage
±24 V
Differential Mode
Operating range
-4 V to +9 V
Differential Threshold
voltage
700 mV
Differential Fixed
hysteresis
30 mV to 200 mV
Differential Input
Impedance
25 kΩ||20 pF or 120 Ω
Software selectable
(preliminary)
LIN receiver specifications
Max. baudrate
20 kbps
Operating range (BAT pin)
6 V to 18 V
Operating range (RX pin)
0 V to 18 V
RX pull up resistance (to
BAT)
40 kΩ
Abolute max voltage (BAT)
±24 V
Abolute max voltage (RX)
±24 V
Threshold voltage
0.5 * VBAT
Hysteresis
0.12 * VBAT
Please note that SP209i can still only
capture 9 channels simultaneously.
Industrial inputs are internally
multiplexed with logic inputs.
It is recommended to connect the ground
of the industrial bus being measured to
the nearest ground screw terminal.
What’s in the box
SP209 series is shipped with the following
accessories:
● SP209(i) device
● 10 leads micro-grabber probes set
(premium quality, custom Ikalogic
design)
● 1 meter length Micro-USB cable
● Cable comb
Unpacking and first usage
We recommend the user to start by
identifying all different components that
are provided, then connect the SP209
device to a free USB port of your
computer using the provided USB cable.
The LED should glow according to the
table in the “Status LEDs behavior”
section.
Status LEDs behavior
Status led can be in one of 3 states:
Status LED
Orange
Device powered up but not
connected to software
White Fix
Device powered up and connected
to software
White blinking
Device powered up, connected to
software and detecting activity on
one of the logic channels.
Software quick start guide
Start by downloading latest version of
ScanaStudio software www.ikaloigic.com
and following instructions to install both