Data Sheet
Ikalogic | SP209 series data sheet | 2
SP209 Series overview
SP209 series logic analyzers and protocol
decoders offer in depth analysis of logic signals
and protocols with 200MHz (5ns) timing
resolution. 9-channel operation allows 8-bit
parallel data to be captured along with a clock or
strobe signal.
SP Series is composed of two devices, SP209
and SP209i. Both offer 9 logic inputs, but
SP209i integrates industrial receivers for
CAN, LIN, RS232 and RS485 buses .
1
Typical applications
SP series logic analyzers are perfectly
adapted for demanding applications,
where it is needed to capture logic signals
with maximum time resolution on all 9
channels.
● Embedded systems debugging
● Research and education
● Serial protocols analysis, like I2C,
SPI, UART or 1-Wire (non exhaustive list)
● Industrial bus analysis: RS232,
RS485, CAN, LIN
● ADC diagnostic
Product highlights
● Schmitt trigger input stages with adjustable thresholds
● 200 MHz sampling rate, with all 9 channels used.
● External clock option (state mode), up to 50MHz
● Precise trigger-In and trigger-Out signals on SMA ports
1
Industrial receivers in the SP209i are multiplexed with one or more of the existing 9 logic
channels