User Manual

User Manual 7

StealthPlug

™

ESPAÑOLITALIANODEUTSCHFRANÇAISJAPANESE

3.4 Mac Control Panel

In Mac OS X you can conveniently control your StealthPlug from the

“Sound” System Preferences. Open the System Preferences, click on

Sound to open the sound panel and then select the StealthPlug USB

device, in the “Input” section (fig. 4).

Now, set the StealthPlug input sensitivity through the “Input volume slider”.

To determine your maximum "Input level" you can play powerchords (e.g.

doing strong down strokes), and check its peak meter. Adjust the “Input vol-

ume slider” so the peak meter is close to the right area (fig. 5).

IMPORTANT: in case your audio application allows for an audio device

setting that is independent from the System setting, select the StealthPlug

from within the application “Audio and Hardware” setup. Now select the

StealthPlug USB as the “Output” device in the Sound panel, as shown in

fig. 6. The StealhPlug Volume Up “+” and down “-” buttons will control the

“Output volume slider” as well the OS X main system audio level.

ENGLISH

Fig. 4. Setting the StealthPlug as Input device

Fig. 5. Setting Input Level and Volume

Fig. 6. Setting the StealthPlug as Output device