User Manual

English
15
AUX IN
Most acoustic guitars used for live performance includes a piezo pickup in the bridge.
This is of course very useful to amplify the instrument but we all know the sound of the piezo pickup does not
actually represent the true tone of the guitar when played acoustically.
With iRig Acoustic Stage AUX IN you can connect the output of your guitar to this input and mix the stock guitar
pickup output with the iRig Acoustic microphone tone.
This will allow to keep using the powerful and reliable output of the piezo pickup onstage in feedback-critical
situations, with just a touch of the iRig Acoustic microphone mixed in to make it sounding way more acoustic
and rich.
Use the MIX control to balance the tone between the Piezo pickup (fully CCW) and the iRig Acoustic
microphone (fully CW).
When using both the AUX and iRig Acoustic sources make sure to experiment with the PHASE switch on the
left side of the iRig Acoustic Stage to make sure you set it on the position where the two sound sources mixes
together the way you prefer.
Low battery indications
When the battery level approach to be low, all the (turned ON) LEDs will fast blink every “2” sec. When the
battery is at a very low level the audio out is muted and the LED continuously blinks.