Information

Info
Apps
Specs
Images
Video
Other Apps
€74.99
Buy Now...
Find a dealer
Buy Now
iGrand Piano for
iPhone/iPod touch
Concert quality
piano app
iGrand Piano for
iPad
Concert quality
piano app
DJ Rig for iPad
The Professional DJ
Mixing App for iPad
iRig PRE
XLR microphone
interface for
iPhone/iPod
touch/iPad
iRig STOMP
The first stompbox
guitar interface for
iPhone/iPod
touch/iPad
iRig KEYS
Universal keyboard
controller for
iPhone/iPod
touch/iPad and
Mac/PC
ARC System 2
Acoustic Room
Correction System
plug-in
Product Spotlight
Home > Products > iRig MIX > Specs
Specs
iRig MIX Controls and Indicators
POWER: turn on iRig MIX. POWER LED will illuminate.1.
GAIN: adjust this control to set the input gain for Channel 1
and 2.
2.
TREBLE: adjust this control to adjust the high frequencies
on Channel 1 or 2.
3.
BASS: adjust this control to adjust the low frequencies on
Channel 1 or 2.
4.
CUE: press this switch on Channel 1 or 2 depending on
which one you want to monitor in your headphones.
5.
CHANNEL LEVEL SLIDER: move this slider up to increase
the volume of Channel 1 or 2.
6.
CHANNEL CROSSFADER: move this slider to the LEFT to
hear Channel 1 on the master outputs, or move this slider
to the RIGHT to hear Channel 2 on the master outputs.
7.
CHANNEL 3 LEVEL: this control is used to set the level for
a microphone or instrument connected to Channel 3.
8.
HEADPHONE LEVEL: this control is used to set the
headphone volume.
9.
MASTER LEVEL: use this control to adjust the global iRig
MIX output volume.
10.
MASTER LEVEL LEDS: these LEDs are used to monitor the iRig MIX level of LEFT and RIGHT master
output channels.
11.
INPUT SWITCH: set this switch to the LEFT position (ONE DEVICE) when using the mixer with only ONE
iOS device or other music player. Set this switch to the RIGHT position (TWO DEVICES) when using the
mixer with TWO iOS devices or other music players.
12.
X-SYNC SWITCH: When used with iOS devices, iRig MIX can send audio from device 1 to device 2 and
audio from device 2 to device 1 to allow cross-syncing using DJ RIg app. When X-SYNC is disabled,
audio from MIC / Instrument channel 3 input is sent to the iOS device connected on channel 1 for
processing with an app like AmpliTube or VocaLive.
13.
Line Input: Line Output:
Frequency response: 20Hz – 20kHz (±2dB)•
SNR: -80dB•
THD+Noise: 0.01%•
Nominal level: -10dBV•
Maximum level: 3 Vrms•
Impedance: 47k Ohm•
Socket: 3.5mm stereo / TRRS•
Frequency response: 20Hz – 20kHz (±2dB)•
SNR: -80dB•
THD+Noise: 0.05% (20Hz – 20kHz Bandwidth)•
Nominal level: -10dBV•
Maximum level: 6 Vrms•
Impedance: 200 Ohm•
Socket: RCA•
Mic / Hi-Z Input: Headphones Output:
Frequency response: 20Hz – 20kHz (±2dB)•
SNR: -80dB•
THD+Noise: 0.05% (20Hz – 20kHz Bandwidth)•
Maximum level (Min Gain): 3Vrms•
Minimum level (Max Gain): 10mVrms•
Impedance: 1 MOhm•
Socket: 6.35mm mono•
Frequency response: 20Hz – 20kHz (±2dB)•
SNR: -80dB•
THD+Noise: 0.05% (20Hz – 20kHz Bandwidth)•
Maximum power: 125mW into 32 Ohms•
Socket: 6.35mm stereo•
Controls: Power Supply:
Low tone controls: ±15 dB @ 80 Hz, shelving•
High tone controls: ±15 dB @ 8 kHz, shelving•
Trim controls: ±15 dB, 0 dB at center•
USB powered through a micro USB (D TYPE)
connector
•
Power consumption: 5 Watt typical; 10 Watt with
full headphone output
•
Site
International
Contact Us Newsletter Log in Register
Home News Products Store Support Community Company
search...
Pa
g
e 1 of 3iRi
g
MIX - the first mobile mixer for iPhone/iPod touch/iPa
d
15.11.2012http://www.ikmultimedia.com/products/iri
g
mix/index.php?pp=iri
g
-mix-specs