User Manual

English
12
Pitch Bend
9
Move this wheel up or down to send Pitch Bend messages. The wheel has a central rest position.
Moving the wheel up will increase the pitch; moving it down will decrease the pitch.
Note that the amount of pitch change depends on how the receiving virtual instrument is set.
Modulation Wheel
10
Move this wheel to send Modulation Wheel messages (MIDI CC#01). The lowest position sends a value of 0; the
highest position sends a value of 127.
Most instruments use this message to control the amount of vibrato or tremolo in the sound, but note that this
depends solely on how the receiving instrument itself is programmed and not on the iRig KEYS settings.
Pedal
3
iRig KEYS supports both Sustain Pedals and Expression Pedals. Connect a NORMALLY OPEN sustain pedal to
the jack
3
BEFORE connecting iRig KEYS to the iOS device or to the computer. When the pedal is depressed,
you will sustain all keyed notes until the pedal is released. iRig KEYS sends MIDI CC#64 with a value of 127
when the pedal is depressed and a value of 0 when released.
Connect a continuous expression pedal to the jack
3
BEFORE connecting iRig KEYS to the iOS device or to
the computer to control EXPRESSION on the sounds you’re playing. iRig KEYS sends MIDI CC#11 when the
expression pedal is moved.