User Manual
Table Of Contents
- English
- Table of Contents
- Introduction
- 1 – Installation and setup
- 2 – Turning the unit ON/OFF - Calibration process
- 3 – Overview
- 4 – Front panel interface
- 5 – Programming a Sequence
- 6 – Presets
- 7 – MIDI Implementation
- 7.1 – General
- 7.2 – Control External Devices with UNO Drum
- 7.3 – Control UNO Drum from External Devices
- 7.4 – Connecting UNO Drum to a computer via MIDI
- 7.5 – Connecting UNO Drum to a computer via USB
- 7.6 – Setting the MIDI Channel
- 7.7 – Setting the Sync Mode
- 7.8 – MIDI Soft Thru
- 7.9 – MIDI Interface Mode
- 7.10 – Element Mapping
- 7.11 – Pad note out
- 7.12 – Program Change
- 7.13 – MIDI Implementation Chart
- 8 – Specifications
- 9 – Troubleshooting
- 10 – Support
UNO Drum
7 – The Sequencer
42
Page 4 of 4
UNO Drum MIDI Implementation Chart V 1.0.1
MIDI Implementation Chart v. 1.0.1 (Page 4 of 4)
Manufacturer: IK Multimedia Model: UNO Drum Version:1.0 Date: 9 May 2019
Sytem Exclusive Message
F0 00 21 1A 02 02 11 01 7F F7 Enter Setup Mode (send this message beforany of the following operation)
F0 00 21 1A 02 02 21 00 06 00 F7 Program Change Receive OFF
F0 00 21 1A 02 02 21 00 06 01 F7 Program Change Receive ON (default)
F0 00 21 1A 02 02 21 00 08 00 F7 Program Change Send OFF
F0 00 21 1A 02 02 21 00 08 01 F7 Program Change Send ON (default)
F0 00 21 1A 02 02 21 00 07 00 F7
F0 00 21 1A 02 02 21 00 07 01 F7
F0 00 21 1A 02 02 21 00 0B 00 F7
F0 00 21 1A 02 02 21 00 0B 01 F7
MIDI Soft Thru OFF
MIDI Soft Thru ON (default)
MIDI Interface Mode OFF
MIDI Interface Mode ON (default)
Function