User Guide
ENGLISH
power on by moving the iRig PRO switch (7) to the ON
positionandcheck thatthe Phantom/ MIDILED (1) has
turnedred.
I can’t get any sound from my guitar / instrument input.
iRigPRO onlyworks with¼”MONOplugsguitar cables.
Never use stereo (TRS) plugs cables as the iRig PRO
instrumentinputwillbemuted.
Specications
•Instrument Input: unbalanced, Hi-Z, TS 1/4” Jack, Tip:
signal/Shield:ground
•InstrumentInputLevel:from30mVppto6.9Vpp
•InstrumentInputImpedance:620kOhms
•MicrophoneInput:balanced,XLR.Pin2:hot/Pin3:cold
/Pin1:ground
•MicrophoneInputLevel:from6mVppto1.4Vpp
•MicrophoneInputImpedance:approx2kOhms
•GainControlRange:47dB
•PhantomPower:48V+/-10%
•InputNoise:-97dBRMS,-105dB(A)
•Distortion(THD):0.01%
•FrequencyResponse:20Hz-20kHz+/-0.5dB
•Conversion:24-bitA/D
•SamplingRate:44.1and48kHz
•Battery: 9V (Alkaline suggested), needed for +48V
phantomonly
Warranty
Pleasevisit:
www.ikmultimedia.com/warranty
forthecompletewarrantypolicy.
Support and more info
www.ikmultimedia.com/support
Apple is not responsible for the operation of this device or its
compliancewithsafetyandregulatorystandards.
WARNING:Permanenthearinglossmayoccurifearbudsorhead-
phonesareusedathighvolume.Youcanadaptovertimetoahigher
volumeofsound,whichmaysoundnormalbutcanbedamagingto
yourhearing.Setyourdevicevolumetoasafelevelbeforethathap-
pens.Ifyouexperienceringinginyourears,reducethevolumeor
discontinueuseofearbudsorheadphoneswithyourdevice.