User's Manual
Table Of Contents
- English
- Contents
- Safety information
- iRig Pro Duo I/O
- Register your iRig Pro Duo I/O
- iRig Pro Duo I/O overview
- Installation and setup
- Connecting an external power supply
- iRig Pro Duo I/O LEDs
- Direct monitoring
- Connecting microphones
- Connecting instruments
- Connecting monitors and headphones
- MIDI IN/OUT
- Setting input gain on iRig Pro Duo I/O
- Troubleshooting
- Specifications
- Warranty
- Support and more info
- Japanese 日本語
English
14
Ribbon microphones
Before connecting a ribbon microphone, turn OFF phantom power and check the microphone’s operating
instruction manual to see if it requires it. Most ribbon microphones don’t require phantom power, and some can
even be damaged by it. If you’re in doubt just leave it OFF. If the microphone won’t work, check its user manual,
it may need phantom power. Please note that when +48V phantom power is turned on, it works on both
channels simultaneously. It is not possible to turn +48V phantom power on one channel only.