User's Manual

English
10
Mac/PC
On Windows based DAWs, IK Multimedia’s proprietary driver needs to be installed for latency control. Please visit
https://www.ikmultimedia.com/userarea/ to download the driver.
1. Connect the included USB cable to iRig Pro Duo I/O’s Mini-DIN connector.
2. Connect the USB cable to a free USB port on your Mac/PC.
3. Make sure phantom power is turned off by setting the Phantom Power switch to the OFF position. Check
that the phantom power LED is OFF.
4. If you are using a microphone connect it using an XLR cable to one of the iRig Pro Duo I/O microphone
inputs.
5. Ifyouareusinganinstrumentlikeaguitarorabass,connectitusingaregular1⁄4”guitarcabletooneofthe
iRig Pro Duo I/O instrument inputs.
6. Launch AmpliTube or any other Core Audio-compatible application and select “iRig Pro Duo” as the input
device from your system’s audio preferences.
7. Connect your headphones to the headphone output jack on iRig Pro Duo I/O and set its level via the
dedicated volume wheel.
8. Connect your mixer or powered speakers to the Main Line Output jacks on iRig Pro Duo I/O and set its level
via the dedicated volume wheel.
Connecting an external power supply
If you want to play for an extended period of time when connected to your iOS device, you can connect the DC
In port on iRig Pro Duo I/O to an external power supply (not included), this way you don’t need to worry about
iRig Pro Duo I/O’s battery life. You can use any guitar pedal power supply unit: 9VDC - 500mA
IMPORTANT: the external power supply will NOT charge the device’s battery.