User manual

English
9
Using iRig MIDI 2
iRig MIDI 2 will work with no setup on all iOS devices when MIDI compatible apps are used.
Remember to always setup matching MIDI channels on the transmitting and receiving devices, apps or controllers.
iRig MIDI 2 is equipped with two blue LEDs that monitor the incoming MIDI IN and the outcoming MIDI OUT signals.
IN LED
OUT LED
When a MIDI signal is arriving in the MIDI IN port on iRig MIDI 2 the LED above the MIDI IN port will blink.
When a MIDI signal is sent from the MIDI OUT port on iRig MIDI 2 the LED above the MIDI OUT port will blink.
When using iRig MIDI 2 with your computer, make sure iRig MIDI 2 is selected as the current MIDI interface in
the preferences or Audio MIDI settings of your preferred software.
MIDI Thru
The THRU port, emits a copy of everything received from the MIDI IN port, allowing data to be forwarded to
other instruments.
The THRU port is used to send MIDI signals to multiple devices simultaneously. For example, you can send MIDI
data from a keyboard controller to an app on your iPad and an external MIDI sound module at the same time.
To do this, connect the sound module to the MIDI THRU port. The signal coming from the keyboard controller
will be sent simultaneously to both the external MIDI sound module and the iPad.
MIDI
THRU