User manual

English
8
Mac
1. Connect the included USB cable to iRig MIDI 2
2. Connect the USB cable to a free USB port on your computer
2
1
3. If you have not done so already, download the SampleTank 3 SE for MAC/PC.
4. To play MIDI-compatible apps from an external controller, use a standard MIDI cable to connect the MIDI
OUT port on your controller to the MIDI IN port of iRig MIDI 2. Always check the specific MIDI input settings
in your app to make sure that the app is ready to receive incoming MIDI communication.
5. To control an external MIDI device from an app, use a standard MIDI cable to connect the MIDI OUT port of
the iRig MIDI 2 to the MIDI IN port of the external device. Always check for specific MIDI output settings in
your app to make sure they are set to transmit MIDI data.
6. When controlling MIDI compatible apps with external controllers, you may want the MIDI signal to also go to
other external devices at the same time. In this case, connect the iRig MIDI 2 THRU port to the MIDI IN port
on the additional devices you want to control.
7. Connect your headphones, mixer or powered speakers to the computer output jack.