Installation Manual
English
49
To set the transport format:
• Enter Edit Mode by pressing the ALT and EDIT buttons;
• The display will show GLO. Rotate the DATA knob until you reach the PRE position. Press the DATA push-
knob to confirm you want to edit a parameter in the preset menu;
• The display will show DTA. Rotate the DATA knob clockwise to reach the TRN position;
• Reached the TRN position press the DATA push-knob;
• The display will show the current format of the transport buttons: MMC, CC or RT.
• Select the format by pushing the DATA knob push-knob;
• The keyboard will exit automatically the Edit Mode;
• You can exit the Edit mode any time by pressing the CANCEL/NO key.
5.3.8 Set different MIDI channel for the keyboard
It is possible to edit the MIDI channel of the keyaboard and to store it on a preset:
• Enter Edit Mode by pressing the ALT and EDIT buttons;
• The display will show GLO. Rotate the DATA knob until you reach the PRE position. Press the DATA push-
knob to confirm you want to edit a parameter in the preset menu;
• The display will show DTA. Rotate the DATA knob clockwise to reach the KEY position;
• Reached the KEY position press the DATA push-knob;
• The display will show CH to indicate you’re going to edit the MICI channel. Press the DATA push-knob to
confirm;
• The display will show the current MIDI channel;
• Turning the DATA knob you can cycle between channel 1 and 16, plus the current MIDI channel setted in
the global menu, marked as GLO. This way the MIDI channel will be fixed to the global MIDI channel of the
keyboard;
• Reached the position you want, press the DATA push-knob;
• The keyboard will exit automatically the Edit Mode;
• You can exit the Edit mode any time by pressing the CANCEL/NO key.