Installation Manual

English
34
• The display will show ALL and by rotating the DATA knob you will cycle between ALL and pad’s number 1
to 8. This way you can decide if assign a different sensitivity to all pads or to specific ones. Press the DATA
push-knob to confirm;
• The display will show REG (regular) and by rotating the DATA knob you will cycle between RED (reduced)
and LOW (for the lowest sensitivity). Press the DATA push-knob to confirm and the keyboard will exit
automatically the Edit Mode;
5.2.7 Edit Prog buttons
A second operating mode for Prog buttons is present to allow fast preset switching. By default the Prog buttons
send program change messages up and down. It is also possible to set the Prog buttons to browse between
the stored presets.
To edit the Prog buttons:
• Enter Edit Mode by pressing the ALT and EDIT buttons;
• The display will show GLO. Press the DATA push-knob to confirm you want to edit a parameter in the global
menu;
• By rotating the DATA knob you will cycle between the parameters of the Global menu;
• Reached the PRG position press the DATA push-knob to confirm you want to edit the Prog buttons;
• The display will show PC (progam change, default setting) and by rotating the DATA knob you will cycle to
PRE (preset: this mode will allows you to browse between the stored presets). Press the DATA push-knob to
confirm and the keyboard will exit automatically the Edit Mode.
5.2.8 LEDs backilight
LEDs can be turned on, dimmed, to better identify capacitive controls on the keyboard. This is particularly useful
in low ambient light situations.
To turn on/off the LEDs:
• Enter Edit Mode by pressing the ALT and EDIT buttons;
• The display will show GLO. Press the DATA push-knob to confirm you want to edit a parameter in the global
menu;
• By rotating the DATA knob you will cycle between the parameters of the Global menu;
• Reached the LED position press the DATA push-knob to confirm you want to edit the LEDs backlight;
• It is now possible to turn ON and OFF the LED backlight by rotating the DATA knob. Press the DATA push-
knob to confirm and the keyboard will exit automatically the Edit Mode.