Installation Manual

English
33
5.2.5 Reset iRig Keys I/O
iRig Keys I/O can be reset to its original factory value of MIDI channel, Programm change, Audio volume, active
preset, velocity, transpose, octave and controls assignations. Note that the factory reset won’t delete the store
User presets.
To reset iRig Keys I/O:
• Enter Edit Mode by pressing the ALT and EDIT buttons;
• The display will show GLO. Press the DATA push-knob to confirm you want to edit a parameter in the global
menu;
• By rotating the DATA knob you will cycle between the parameters of the Global menu;
• Reached the RST position press the DATA push-knob to confirm you want to reset the keyboard
parameters;
• The keyboard will request you to confirm if you want to perform the reset, by showing CFM;
• By pressing the DATA push-knob the keyaboard will be resetted and it will exit automatically the Edit Mode;
• You can exit the edit mode any time by pressing the CANCEL/NO key.
5.2.6 Setting drum pads sensitivity
It is now possible to set different pad’s sensitivity to fit different user needs, to all the pads or to a specific pad.
To assign different pad’s sensitivity:
• Enter Edit Mode by pressing the ALT and EDIT buttons;
• The display will show GLO. Press the DATA push-knob to confirm you want to edit a parameter in the global
menu;
• By rotating the DATA knob you will cycle between the parameters of the Global menu;
• Reached the PAD position press the DATA push-knob to confirm you want to edit the pad’s sensitivity;
• The display will show SNS (sensitivity). Press the DATA push-knob to confirm;