Installation Manual

English
30
• Enter Edit Mode by pressing the ALT and EDIT buttons;
• The display will show GLO. Press the DATA push-knob to confirm you want to edit a parameter in the global
menu;
• By rotating the DATA knob you will cycle between the parameters of the Global menu
• Reached the KEY position pess the DATA push-knob to confirm you want to edit the keyaboard parameters;
• The display will shows CH (MIDI channel).
• Press the DATA puch-knob to confirm you want to set a MIDI channel;
• The display will show the current MIDI channel number;
• By rotating the DATA knob you can select the MIDI channel numer from 1 to 16;
• To confirm your input press the DATA push-knob;
• The keyboard will exit automatically the Edit Mode;
• You can exit the Edit mode any time by pressing the CANCEL/NO key.
5.2.2.2 Set different velocity (touch) response to the keyboard
The keyboard on iRig Kyes I/O is velocity sensitive. Usually this means that the harder you hit the keys, the
louder the sound that is produced. However this ultimately depends on how the instrument you’re controlling is
programmed and your playing style.
In order to match the style of individual users, iRig Keys I/O offers six different velocity response settings:
“S” VEL SENS, SOFT Use this setting if you prefer a light touch on the keys. This is especially useful when you
need to play fast passages or program drum patterns.
“N” VEL SENS, NORMAL. This setting is the default setting and works well in most cases.
“H” VEL SENS, HEAVY. Use this setting if you prefer a heavy touch on the keys.
“64” FIXED, 64. This setting will always send a fixed MIDI velocity value of 64 without any touch response.
“100” FIXED, 100. This setting will always send a fixed MIDI velocity value of 100 without any touch response.
“127” FIXED, 127. This setting will always send a fixed MIDI velocity value of 127 without any touch response.
To set the velocity response:
• Enter Edit Mode by pressing the ALT and EDIT buttons;
• The display will show GLO. Press the DATA push-knob to confirm you want to edit a parameter in the
global menu;
• By rotating the DATA knob you will cycle between the parameters of the Global menu
• Reached the KEY position pess the DATA push-knob to confirm you want to edit the keyaboard
parameters;
• The display will shows CH (MIDI channel) and by rotating the DATA knob it will cycle between VEL (velocity)
-> TRS (transpose);
• Reached the VEL position press the DATA push-knob to confirm you want to set a Velocity response;