Installation Manual
English
28
5 Edit Mode
In Edit Mode you can edit parameters related to the keyboard, pads, touch controls, knobs and perform a
factory reset.
To enter to the Edit Mode, press the ALT button and then the EDIT button:
The display will shows GLO (global menu) to edit the global parameters and, by rotating the DATA knob, PRE
(preset menu) to edit the parameters associated to the preset. It is possible to select global or preset by rotating
the DATA knob: the confirmation of each action is provided by pushing the DATA knob.
In GLO (global menu) you will find: PC (program change number) - KEY (keyboard) - PAD (Pads sensitivity) -
TCH (touch knobs) - LED (LEDs backlight) - PRG (Prog buttons beahviour) - OFF (all-notes-off) - RST (factory
reset)
In PRE (preset menu) you will find: DTA (DATA knob) - KEY (Keyboard MIDI CH) - KNB (Knobs) - PED (external
pedal) - PAD (drum pads) - SLD (sliders) - TRN (transport)
5.1 Audio output volume
By default the audio output volume is set as ALT function of the DATA knob, so to adjust the audio output
volume press the ALT button and rotate the DATA knob. The audio volume can be assigned as primary or ALT
function by the user. Please refer to the dedicated section on this manual.
5.2 Global edit menu
5.2.1 Send specific MIDI Program Changes numbers, and set Current Program number
iRig Keys I/O can send MIDI Program Changes in two ways: