User Manual
Table Of Contents
- English
- Contents
- Power adapter information
- iRig Keys I/O
- Register your iRig Keys I/O
- 1 Installation and setup
- 2 MIDI controller section
- 3 Presets
- 4 Factory default settings
- 4.1 Global settings
- 4.2 Factory 1 - IK Virtual Instruments
- 4.2.1 iRig Keys I/O integration with IK Virtual Instruments
- 4.3 Factory 2 - Apple Logic Pro X/GarageBand
- 4.3.1 iRig Keys I/O integration with Logic Pro and Garage Band
- 4.4 Factory 3 - Chromatic PADS + MIDI Volume and MIDI Pan
- 4.5 Factory 4 - Program Change PADS + MIDI Volume and MIDI Pan
- 4.6 Factory 5 - Ableton Live
- 4.7 Factory 6 - Apple MainStage
- 5 Edit Mode
- 5.1 Audio output volume
- 5.2 Global edit menu
- 5.2.1 Send specific MIDI Program Changes numbers, and set Current Program number
- 5.2.2 Keyboard edit
- 5.2.2.1 Set the MIDI Transmit Channel of the keyboard
- 5.2.2.2 Set different velocity (touch) response to the keyboard
- 5.2.2.3 Transpose the keyboard in semitones
- 5.2.3 Enable/disable touch knob features
- 5.2.4 Send “All Notes Off” MIDI message
- 5.2.5 Reset iRig Keys I/O
- 5.2.6 Setting drum pads sensitivity
- 5.2.7 Edit Prog buttons
- 5.2.8 LEDs backilight
- 5.3 Preset edit menu
- 5.3.1 DATA Knob
- 5.3.1.1 Edit the DATA knob
- 5.3.2 Knob edit
- 5.3.3 External pedal edit
- 5.3.3.1 Assign CC to the expression pedal
- 5.3.3.2 Assign CC to the Sustain pedal
- 5.3.3.3 Assign PC to the Sustain pedal
- 5.3.4 Pads edit
- 5.3.4.1 Set the MIDI Transmit Channel
- 5.3.4.2 Set different velocity (touch) response
- 5.3.4.3 Single Pad editing
- 5.3.5 Slider edit
- 5.3.5.1 Assign a Pitch bend command to a slider
- 5.3.5.2 Assign a Mod wheel command to a slider
- 5.3.5.3 Assign a CC message to a slider
- 5.3.6 Slider editing on iRig Keys I/O 25
- 5.3.6.1 Assign a Pitch bend command to a slider
- 5.3.6.2 Assign a Mod wheel command to a slider
- 5.3.6.3 Assign a CC message to a slider
- 5.3.6.4 Assign the Octave control to a slider
- 5.3.6.5 Assign the Program Change control to a slider
- 5.3.7 Transport edit
- 5.3.8 Set different MIDI channel for the keyboard
- 6 Low Battery
- Troubleshooting
- Specifications
- Warranty
- Support and more info
- Regulatory
- 日本語
- 目次
- iRig Keys I/O - パッケージ同梱物
- iRig Keys I/Oの登録
- 電源アダプターに関する情報
- 1 インストールと設定
- 2 MIDIコントローラー
- 3 プリセット
- 4 工場出荷設定
- 5 エディットモード
- 5.1 オーディオ出力ボリューム
- 5.2 グローバルエディットメニュー
- 5.2.1 MIDIプログラムチェンジの送信と設定、プログラムチェンジ番号設定
- 5.2.2 キーボー設定
- 5.2.2.1 キーボードMIDIチャンネルの設定
- 5.2.2.2 キーボードヴェロシティ感度（タッチレスポンス）の変更
- 5.2.2.3 キーボードトランスポーズ（半音単位）
- 5.2.3 タッチノブ機能のオン・オフ
- 5.2.4 MIDI“オールノートオフ”情報の送信
- 5.2.5 iRig Keys I/Oの本体リセット
- 5.2.6 ドラムパッドの感度設定
- 5.2.7 PROGボタンの設定
- 5.2.8 LEDバックライトt
- 5.3 プリセット設定メニュー
- 5.3.1 DATAノブ
- 5.3.1.1 DATAノブ設定
- 5.3.2 ノブ（1~8）設定
- 5.3.3 外部ペダル設定
- 5.3.3.1 エクスプレッションペダルのCC設定
- 5.3.3.2 サスティンペダルのCC設定
- 5.3.3.3 サスティンペダルのプログラムチェンジ設定
- 5.3.4 パッド設定
- 5.3.4.1 送信MIDIチャンネルの設定
- 5.3.4.2 ヴェロシティ感度（タッチレスポンス）の変更
- 5.3.4.3 パッドの個別設定
- 5.3.5 スライダー設定
- 5.3.5.1 ピッチベンド設定
- 5.3.5.2 モジュレーションホイール設定
- 5.3.5.3 MIDI CC設定
- 5.3.6 iRig Keys I/O 25のスライダー設定
- 5.3.6.1 ピッチベンド設定
- 5.3.6.2 モジュレーションホイール設定
- 5.3.6.3 MIDI CC設定
- 5.3.6.4 オクターブコントロール設定
- 5.3.6.5 プログラムチェンジ設定
- 5.3.7 トランポート設定
- 5.3.8 キーボードの個別MIDIチャンネル設定
- 6 ローバッテリー
- トラブルシューティング
- 製品仕様
- サポートおよびその他の情報
- 保証
- Português
- Conteúdo
- Informações sobre o adaptador de energia
- iRig Keys I/O
- Registre seu iRig Keys I/O
- 1 Instalação e configuração
- 2 Seção de controlador MIDI
- 3 Presets
- 4 Configurações padrão de fábrica
- 4.1 Configurações globais
- 4.2 Factory 1 - Instrumentos Virtuais IK
- 4.2.1 Integração do iRig Keys I/O com Instrumentos Virtuais IK
- 4.3 Factory 2 - Apple Logic Pro X/GarageBand
- 4.3.1 Integração do iRig Keys I/O com Logic Pro e Garage Band
- 4.4 Factory 3 - Pads Cromáticos + Volume MIDI e Pan MIDI
- 4.5 Factory 4 - Troca de Programa com PADS + Volume MIDI e Pan MIDI
- 4.6 Factory 5 - Ableton Live
- 5 Modo Edit
- 5.1 Volume de saída de áudio
- 5.2 Menu de edição global
- 5.2.1 Enviar números específicos de Troca de Programa MIDI, e configure o número do Programa Atual
- 5.2.2 Editar teclado
- 5.2.2.1 Definir o Canal de Transmissão MIDI do teclado
- 5.2.2.2 Definir diferentes respostas à velocidade (velocity/touch) para o teclado
- 5.2.2.3 Transpor o teclado em semitons
- 5.2.3 Habilitar/desabilitar recursos de toque dos botões
- 5.2.4 Enviar mensagem MIDI “All Notes Off”
- 5.2.5 Reiniciando o iRig Keys I/O
- 5.2.6 Definindo a sensibilidade dos pads de bateria
- 5.2.7 Botões Edit Prog
- 5.2.8 Retroiluminação dos LEDs
- 5.3 Menu de edição de preset
- 5.3.1 Botão DATA
- 5.3.1.1 Editar o botão DATA
- 5.3.2 Editar botão
- 5.3.3 Editar pedal externo
- 5.3.3.1 Atribuir um CC ao pedal de expressão
- 5.3.3.2 Atribuir CC ao pedal de Sustain
- 5.3.3.3 Atribuir um PC ao pedal de Sustain
- 5.3.4 Editar Pads
- 5.3.4.1 Definir o Canal de Transmissão MIDI
- 5.3.4.2 Definir respostas de velocity (touch) diferentes
- 5.3.4.3 Edição de Pad individual
- 5.3.5 Edição do Slider
- 5.3.5.1 Atribuir o comando Pitch Bend a um slider
- 5.3.5.2 Atribuir um comando Mod Wheel a um slider
- 5.3.5.3 Atribuir uma mensagem CC a um slider
- 5.3.6 Editar Slider no iRig Keys I/O 25
- 5.3.6.1 Atribuir um comando de Pitch Bend a um slider
- 5.3.6.2 Atribuir um comando de Mod Wheel a um slider
- 5.3.6.3 Atribuir uma mensagem CC a um slider
- 5.3.6.4 Atribuir o controle de Oitava a um slider
- 5.3.6.5 Atribuir um controle de Program Change a um slider
- 5.3.7 Editar transporte
- 5.3.8 Defina um canal MIDI diferente para o teclado
- 6 Pilha Fraca
- Solução de Problemas
- Especificações
- Garantia
- Suporte e mais informações
- Regulamentação
English
40
5.3.4.2 Set different velocity (touch) response
The pads on iRig Keys I/O are velocity sensitive. Usually this means that the harder you hit the pads, the louder
the sound that is produced. However this ultimately depends on how the instrument you’re controlling is
programmed and your playing style.
In order to match the style of individual users, iRig Keys I/O offers six different velocity response settings:
“S” VEL SENS, SOFT. Use this setting if you prefer a light touch on the keys. This is especially useful when you
need to play fast passages or program drum patterns.
“N” VEL SENS, NORMAL. This setting is the default setting and works well in most cases.
“H” VEL SENS, HEAVY. Use this setting if you prefer a heavy touch on the keys.
“64” FIXED, 64. This setting will always send a fixed MIDI velocity value of 64 without any touch response.
“100” FIXED, 100. This setting will always send a fixed MIDI velocity value of 100 without any touch response.
“127” FIXED, 127. This setting will always send a fixed MIDI velocity value of 127 without any touch response.
To set the velocity response:
• Enter Edit Mode by pressing the ALT and EDIT buttons;
• The display will show GLO. Rotate the DATA knob until you reach the PRE position. Press the DATA push-
knob to confirm you want to edit a parameter in the preset menu;
• The display will show DTA. Rotate the DATA knob clockwise to reach the PAD position;
• Reached the PAD position press the DATA push-knob;
• The display will show CH and will . Rotate the the DATA knob clockwise to reach the VEL position;
• The display will show the current velocity value ;
• By rotating the DATA knob you can select the velocity response;
• To c on fi rm your input pre ss th e DATA push- k n ob ;
• The keyboard will exit automatically the Edit Mode;
• Yo u c an ex it the Edit mode any time by pre ss ing the CANCEL/NO key.
5.3.4.3 Single Pad editing
You can assign a Note a C C o r a P C t o an y dr um pad. To e di t the si ngle pa d:
• Enter Edit Mode by pressing the ALT and EDIT buttons;
• The display will show GLO. Rotate the DATA knob until you reach the PRE position. Press the DATA push-
knob to confirm you want to edit a parameter in the preset menu;
• The display will show DTA. Rotate the DATA knob clockwise to reach the PAD position;