User Manual
Table Of Contents
- English
- Contents
- iRig Keys 2
- Features
- Register your iRig Keys 2
- 1 Installation and setup
- 2 Playing with iRig Keys 2
- 3 Factory default settings
- 4 EDIT mode
- 4.1 Set the MIDI transmit channel
- 4.2 Set different velocity (touch) response
- 4.3 Assign a specific MIDI control change number to the knobs 1 to 8
- 4.4 Assign a specific MIDI control change number to the DATA knob
- 4.5 Assign a specific MIDI control change number to the DATA push
- 4.6 Send specific MIDI program changes numbers and set current program number
- 4.7 Send “All Notes Off” MIDI message - iRig Keys 2 and iRig Keys 2 Pro
- 4.8 Transpose the keyboard in semitones - iRig Keys 2 and iRig Keys 2 Pro
- 4.9 Reset iRig Keys 2
- 5 SETs
- 6 Standalone mode
- Troubleshooting
- Warranty
- Support and more info
- Regulatory
- Japanese (日本語)
- 目次
- iRig Keys 2同梱物
- 主な機能
- ユーザー登録
- 1 インストールと設定
- iRig Keys 2を使用する
- 3 工場出荷設定
- 4 EDIT - エディットモード
- 4.1 MIDI CH - MIDI送信チャンネル設定
- 4.2 VEL - ヴェロシティ感度（タッチレスポンス）設定
- 4.3 KNOB - MIDIコントロール・チェンジ番号設定 - ノブ1-8
- 4.4 DATA - MIDIコントロール・チェンジ番号設定 - DATAノブ
- 4.5 DATA - MIDIコントロール・チェンジ番号設定 - DATAプッシュ
- 4.6 PROG - MIDIプログラム・チェンジ番号送信、現在のプログラム番号設定
- 4.7 ALL NOTES OFF - MIDI情報“オール・ノート・オフ”の送信
- 4.8 TRANSP - キーボード・トランスポーズ（半音単位）
- 4.9 iRig Keys 2の本体リセット
- 5 SET - セット
- 6 スタンドアローン・モード
- トラブル・シューティング
- サポートおよびその他の情報
English
18
5.2 How to program a SET
To program a specific SET, always select it before, then set up iRig Keys 2 as you prefer (see the Chapters
“Playing with iRig Keys 2” and “Edit mode”). Until the SET is not saved, the corresponding SET’s LED will flash
periodically.
5.3 How to save a SET
To store a SET so that it will permanently save all settings that you have made, HOLD the SET button for two
seconds. The current SET LED will flash to confirm that the SET has been saved. Remember to always save a
SET if you have made modifications to it that you would like to keep.
6 Standalone mode
STANDALONE MIDI OUT
5V DC
*
The iRig Keys 2 can work as a stand-alone controller when no host is connected. You can use the iRig Keys
2 to control an external MIDI module (using the physical MIDI OUT port), by connecting the iRig Keys 2’s USB
to a power outlet using an optional USB power adapter. All the messages generated by the keyboard will be
routed to the MIDI OUT port. All the editing capabilities remain active, so it is still possible to edit the keyboard
and save sets. It is also possible to connect an external MIDI device to the MIDI IN port of iRig Keys 2: in this
situation the MIDI IN messages will be routed to the physical MIDI OUT port.
* Power adapter not included