User Manual
Table Of Contents
- English
- Contents
- iRig Keys 2
- Features
- Register your iRig Keys 2
- 1 Installation and setup
- 2 Playing with iRig Keys 2
- 3 Factory default settings
- 4 EDIT mode
- 4.1 Set the MIDI transmit channel
- 4.2 Set different velocity (touch) response
- 4.3 Assign a specific MIDI control change number to the knobs 1 to 8
- 4.4 Assign a specific MIDI control change number to the DATA knob
- 4.5 Assign a specific MIDI control change number to the DATA push
- 4.6 Send specific MIDI program changes numbers and set current program number
- 4.7 Send “All Notes Off” MIDI message - iRig Keys 2 and iRig Keys 2 Pro
- 4.8 Transpose the keyboard in semitones - iRig Keys 2 and iRig Keys 2 Pro
- 4.9 Reset iRig Keys 2
- 5 SETs
- 6 Standalone mode
- Troubleshooting
- Warranty
- Support and more info
- Regulatory
- Japanese (日本語)
- 目次
- iRig Keys 2同梱物
- 主な機能
- ユーザー登録
- 1 インストールと設定
- iRig Keys 2を使用する
- 3 工場出荷設定
- 4 EDIT - エディットモード
- 4.1 MIDI CH - MIDI送信チャンネル設定
- 4.2 VEL - ヴェロシティ感度（タッチレスポンス）設定
- 4.3 KNOB - MIDIコントロール・チェンジ番号設定 - ノブ1-8
- 4.4 DATA - MIDIコントロール・チェンジ番号設定 - DATAノブ
- 4.5 DATA - MIDIコントロール・チェンジ番号設定 - DATAプッシュ
- 4.6 PROG - MIDIプログラム・チェンジ番号送信、現在のプログラム番号設定
- 4.7 ALL NOTES OFF - MIDI情報“オール・ノート・オフ”の送信
- 4.8 TRANSP - キーボード・トランスポーズ（半音単位）
- 4.9 iRig Keys 2の本体リセット
- 5 SET - セット
- 6 スタンドアローン・モード
- トラブル・シューティング
- サポートおよびその他の情報
English
9
2 Playing with iRig Keys 2
You can start playing as soon as you connect iRig Keys 2 to your iOS device or computer and launch a virtual
instrument app or plug-in. Pressing the keys on the iRig Keys 2 keyboard sends MIDI note messages. iRig Keys
2 has a 37-note keyboard that is approximately centered in the middle of a full 88-note piano keyboard.
2.1 Octave shift buttons
By default, iRig Keys 2 plays notes between C2 and C5. If you need to play notes lower or higher than this
range, you can shift the whole keyboard in octaves using the OCT up and down buttons.
When the LEDs for both OCT buttons are off, no octave shift is applied. You can shift a maximum of 3 octaves
up or 4 octaves down. OCT up or down buttons will illuminate when an octave shift is active.
The OCT up or down buttons will flash each time you press them.
The number of times they flash corresponds to the number of octaves up or down the keyboard is shifted.
2.2 Volume
This knob adjust the audio level of the headphones output.