Guitar interface USER MANUAL
Contents Table of Contents Contents 2 English 3 iRig HD 2 3 Register your iRig HD 2 3 Installation and setup 4 iOS devices 4 Mac 7 Setting input gain on iRig HD 2 8 Amplifier output jack 8 THRU-FX switch 9 Headphone output jack 9 Stand adapter 9 Troubleshooting 10 Specifications 10 Warranty 10 Support and more info 10 Regulatory 11 2
English iRig HD 2 Thank you for purchasing iRig HD 2. Your package contains: • iRig HD 2 • USB cable • Lightning cable • Velcro clip • Velcro strip • Quick Start Guide • Registration Card 1x 1x 1x 1x 1x iRig HD 2 is the successor of the wildly popular iRig HD digital guitar interface for iPhone, iPad, Mac & PC. This new version of the iRig HD 2 is packed full of player-centric features in an all new enclosure.
English Installation and setup iOS devices 1. Connect the included micro-USB cable to the iRig HD 2. 2. Connect the cable to the Lightning port on your device. 1 2 3. Connect your guitar, bass or other mono instrument to the 1/4” input jack on iRig HD 2.
English 4. Download your preferred app from your device’s app store. AmpliTube 4 iOS/Mac/PC FREE DOWNLOAD ikdownloads.com/irighd2 5. Connect your headphones, mixer or powered speakers to the iRig HD 2 headphone jack.
English 6. Connect an external amplifier to the 1/4” TS Amplifier output jack on iRig HD 2 and select the type of signal sent to the output with the THRU-FX switch. 1/4" 7. If needed, connect the detachable velcro-slot to the back of iRig HD 2 and attach it to any stand or pole with the velcro strap.
English Mac 1. Connect the included micro-USB cable to the iRig HD 2. 2. Connect the cable to an available USB port on your Mac. The status LED on iRig HD 2 will turn dark blue. 1 2 3. Connect your guitar, bass or other mono instrument to the 1/4” input jack on iRig HD 2. 4. Launch AmpliTube or any other Core-Audio compatible application and select iRig HD 2 as the input device from the audio preference. 5. Connect your headphones, mixer or powered speakers to your Mac headphone jack. 6.
English Setting input gain on iRig HD 2 When playing your instrument check the iRig HD 2 status LED. BLUE GREEN / ORANGE RED • • • If the LED is alternating between BLUE and GREEN or is always GREEN, you should increase the iRig HD 2 input gain by rotating the GAIN control toward the output connector. If the LED is sometimes flashing RED you should decrease the iRig HD 2 input gain by rotating the GAIN control toward the input connector.
English THRU-FX switch FX THRU The Thru-Fx switch allows you to select the type of output that is sent thru the “Amplifier output jack.” When this switch is set to THRU, the “Amplifier output jack” carries the same signal that is sent to the instrument input. This mode is typically used to send the dry instrument signal back out to an instrument amplifier or other unbalanced input.
English Troubleshooting Sound is distorted. Check that the input gain on iRig HD 2 has been set properly. If the LED is red when you play your instrument, decrease the input gain as described in this guide. I don’t get any sound. In order for iRig HD 2 to turn on, a Core Audio-compatible audio app must first be launched on your iOS device or Mac. • iOS: be sure you are using an app that works with audio input from the Lightning dock connector.
Regulatory FCC statement This device complies with Part 15.107 and 15.109 Class B of the FCC Rules CFR47: October 2010. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
