User Manual
Table Of Contents
- English
- Contents
- AXE I/O SOLO
- Register your AXE I/O SOLO
- Front panel
- Rear panel
- 1 Installation and setup
- 2 Dedicated guitar features
- 3 Setup your DAW
- 4 Connecting microphones
- 5 Connecting instrument
- 6 Connecting loudspeakers and headphones
- 7 Direct monitoring
- 8 Control software
- 9 Specifications
- Warranty
- Support and more info
- Regulatory
- Japanese (日本語)
English
7
2. Connect the AXE I/O SOLO to your computer with the supplied USB cable.
3. You can connect instrument signal to the front Jack 1/4” Instrument input 1, or microphone and line level
signal to the back combo XLR input 2.
4. Connect speakers, amplifiers or other line devices to the balanced outputs on the rear panel of AXE I/O
SOLO.
5. If needed, you can connect external MIDI devices to the physical MIDI ports (Input/Output).