User Manual

English
7
6. Connect your headphones, mixer or powered speakers to the Android device headphone jack to monitor
your recording.
PC
1. Connect the included Micro USB to USB cable to iRig Mic HD-A.
2. Connect the USB cable to a free USB port on your PC, the status LED on iRig Mic HD-A will turn dark blue.
3. Launch your audio application and select iRig Mic HD-A as the input device from the audio preferences. The
status LED on iRig Mic HD-A will turn bright blue.
4. Start talking or singing into iRig Mic HD-A, and then adjust the input level as required using the gain knob.
5. Connect your headphones, mixer or powered speakers to the headphone jack on your PC to monitoring
your recording.
WARNING: Permanent hearing loss may occur if earbuds or headphones are used at high
volume. You can adapt over time to a higher volume of sound, which may sound normal but can
be damaging to your hearing. Set your device volume to a safe level before that happens. If you
experience ringing in your ears, reduce the volume or discontinue use of earbuds or headphones
with your device.