USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
ENGLISH TABLE OF CONTENTS FOR YOUR SAFETY.......................................................................................... 1 SAFETY PRECAUTIONS.............................................................................. 1 SPECIAL NOTES ON LCD MONITORS ....................................................... 3 CUSTOMER SERVICE ................................................................................. 3 CLEANING ................................................................................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION ENGLISH The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1920 × 1080 ENGLISH High Contrast 3000:1 (Typical), Adv. Contrast Function Available / Brightness 250cd/m2 (Typical) : ProLite XUB2294HSU / ProLite XU2294HSU / ProLite XUB2294HS / ProLite XU2294HS High Contrast 1000:1 (Typical), Adv.
INSTALLATION WARNING Before installation, make sure the wall, ceiling or desktop arm is strong enough to hold the necessary weight of the display and the mount. WARNING When you use with the wall mounting, in consideration of thickness of the mounting stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor.
< ROTATING THE DISPLAY > ● ProLite XUB2294HSU / ProLite XUB2294HS / ProLite XUB2292HS The monitor is designed to be compatible with both landscape and portrait modes. Video card for portrait display will be required for rotating the image on the screen. Available Not Available A A A A Landscape Power Indicator Portrait Portrait With Stand: NOTE Adjust the monitor’s height before panel rotation.
FITTING AND REMOVAL OF BASE : ProLite XUB2294HSU / ProLite XUB2294HS / ProLite XUB2292HS Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid an electric shock or a damage.
FITTING AND REMOVAL OF BASE : ProLite XU2294HSU / ProLite XU2294HS / ProLite XU2292HS ENGLISH CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid an electric shock or a damage. Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
ENGLISH CONTROLS AND CONNECTORS : ProLite XUB2294HSU / ProLite XUB2294HS / ProLite XUB2292HS Power Indicator NOTE Blue: Normal operation Orange: Power Management Power Switch ( ) Menu / Select Button (MENU) Scroll Up / Volume Button ( ) / Scroll Down / ECO Mode Button ( / ) Exit Button (EXIT) Input Select Button (INPUT) Speakers USB Downstream Connector ( USB Upstream Connector ( )* )* Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor
ENGLISH CONTROLS AND CONNECTORS : ProLite XU2294HSU / ProLite XU2294HS / ProLite XU2292HS Power Indicator NOTE Blue: Normal operation Orange: Power Management Power Switch ( ) Menu / Select Button (MENU) Scroll Up / Volume Button ( ) / Scroll Down / ECO Mode Button ( / ) Exit Button (EXIT) Input Select Button (INPUT) Speakers USB Downstream Connector ( USB Upstream Connector ( )* )* Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor fr
CONNECTING YOUR MONITOR : ProLite XUB2294HSU NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
CONNECTING YOUR MONITOR : ProLite XUB2294HS / ProLite XUB2294HS Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power source. Turn on your monitor and computer.
CONNECTING YOUR MONITOR : ProLite XU2294HSU NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
CONNECTING YOUR MONITOR : ProLite XU2294HS / ProLite XU2292HS Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power source. Turn on your monitor and computer.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 41: COMPLIANT TIMING. ENGLISH ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite XUB2294HSU / ProLite XUB2294HS / ProLite XUB2292HS For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to your own preference. 130mm Hold the panel so that the monitor does not topple when you change the monitor’s height or angle.
ENGLISH ADJUSTING THE VIEWING ANGLE : ProLite XU2294HSU / ProLite XU2294HS / ProLite XU2292HS For optimal viewing it is recommended to look at the full face of the monitor. Hold the stand so that the monitor does not topple when you change the monitor’s angle. You are able to adjust the monitor’s angle up to 22° upward, 5° downward.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 41. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 28 for SCREEN ADJUSTMENTS. Select the Menu item which contains the adjustment icon relating to the adjustment you want to make. Press the MENU Button. Then, use the / Buttons to highlight the desired adjustment icon.
ADJUSTMENT MENU CONTENTS Auto Adjust ProLite XUB2294HSU AUTO ADJUST PICTURE ADJUST CLICK ENTER AGAIN TO AUTO ADJUST AUTO ADJUST GEOMETRY COLOR SETTINGS OSD LANGUAGE RECALL MISCELLANEOUS ENGLISH INPUT SELECT AUDIO SETTINGS Adjustment Item Auto Adjust * Problem / Option Button to Press Adjust H. / V. Position, Clock and Phase automatically. * Only Analog Input. For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 26 for SCREEN ADJUSTMENTS.
Picture Adjust *1 ProLite XUB2294HSU AUTO ADJUST BRIGHTNESS PICTURE ADJUST GEOMETRY CONTRAST COLOR SETTINGS OSD ECO OFF LANGUAGE BLUE LIGHT REDUCER OFF RECALL ADV. CONTRAST MISCELLANEOUS OVERDRIVE OFF ON OFF INPUT SELECT Adjustment Item Problem / Option Brightness *2,3,4 Too dark Too bright Contrast *3 Too dull Too intense ECO Blue Light Reducer Adv. Contrast Overdrive *1 *2 *3 *4 Direct Button to Press Off Normal Mode1 Brightness of back-light is reduced.
Geometry * ProLite XUB2294HSU AUTO ADJUST GEOMETRY PICTURE ADJUST HORIZONTAL POSITION GEOMETRY VERTICAL POSITION COLOR SETTINGS PIXEL CLOCK OSD PHASE LANGUAGE RECALL MISCELLANEOUS INPUT SELECT ENGLISH AUDIO SETTINGS Adjustment Item Problem / Option Horizontal Position Too left Too right Vertical Position Too low Too high Pixel Clock Too narrow Too wide Phase To correct flickering text or lines * Only Analog Input. See page 28 for SCREEN ADJUSTMENTS.
Color Settings ProLite XUB2294HSU AUTO ADJUST COLOR TEMPERATURE 9300K PICTURE ADJUST GEOMETRY 7500K 6500K USER PRESET COLOR SETTINGS RED OSD GREEN LANGUAGE BLUE RECALL MISCELLANEOUS I-STYLE COLOR OFF INPUT SELECT Adjustment Item Problem / Option Button to Press 9300K Color Temperature *1 7500K User Preset *1 Red Green 6500K Blue Off Standard i-Style Color *2 Direct Game Too weak Too strong Return to a state set by color adjustment except i-Style Color.
OSD ProLite XUB2294HSU AUTO ADJUST PICTURE ADJUST ON SCREEN DISPLAY SETTINGS OSD HORIZONTAL POSITION GEOMETRY OSD VERTICAL POSITION COLOR SETTINGS OSD ROTATE OSD OSD TIME LANGUAGE RECALL MISCELLANEOUS INPUT SELECT ENGLISH AUDIO SETTINGS Adjustment Item Problem / Option Button to Press OSD Horizontal Position OSD is too left OSD is too right OSD Vertical Position OSD is too low OSD is too high OSD Rotate * Rotate the OSD.
Language ProLite XUB2294HSU AUTO ADJUST PICTURE ADJUST ENGLISH POLSKI GEOMETRY FRANÇAIS ESPAÑOL COLOR SETTINGS DEUTSCH NEDERLANDS OSD ITALIANO ČESKÝ РУССКИЙ LANGUAGE RECALL MISCELLANEOUS INPUT SELECT Adjustment Item Problem / Option English Français Language English French German Italian Polish Deutsch Italiano Polski Recall Button to Press Español Spanish Nederlands Dutch Czech Ĉesky Russian Japanese ProLite XUB2294HSU AUTO ADJUST PICTURE ADJUST RECALL ALL? RECALL GEOMETRY
Miscellaneous ProLite XUB2294HSU AUTO ADJUST MISCELLANEOUS PICTURE ADJUST SHARP AND SOFT GEOMETRY VIDEO MODE ADJUST COLOR SETTINGS OPENING LOGO FULL ON OFF OSD LANGUAGE DISPLAY INFORMATION 1920 x 1080 60Hz VGA RECALL MISCELLANEOUS INPUT SELECT ENGLISH AUDIO SETTINGS Adjustment Item Problem / Option Button to Press 123456 Sharp and Soft Video Mode Adjust You can change the picture quality from 1 to 6 (sharp to soft).
Input Select ProLite XUB2294HSU AUTO ADJUST Direct INPUT SOURCE AUTO PICTURE ADJUST GEOMETRY MANUAL MANUAL COLOR SETTINGS SELECT OSD SELECT LANGUAGE SELECT RECALL MISCELLANEOUS INPUT SELECT Adjustment Item Problem / Option Auto Input Source Manual Button to Press Search for an available input source and select automatically. Select the Analog (VGA) input. VGA Select the Digital (HDMI) input. HDMI DisplayPort Select the Digital (DisplayPort) input.
Audio Settings ProLite XUB2294HSU AUTO ADJUST VOLUME PICTURE ADJUST GEOMETRY OPTIONS COLOR SETTINGS MUTE AUDIO OSD AUDIO INPUT ON HDMI OFF DP Line In LANGUAGE RECALL MISCELLANEOUS INPUT SELECT ENGLISH AUDIO SETTINGS Adjustment Item Volume Direct Mute Audio Problem / Option Button to Press Too soft Too loud On Turn off the sound temporarily. Off Return the sound volume to the previous level.
Lock Mode The OSD can be locked to avoid an accidental setting change. The Power Switch can be locked to avoid an accidental power operation. 1. Make sure the monitor is turned ON. Button for about 10 seconds. If 2. The Power Switch lock will be activated by pressing the front you try to turn off the monitor by pressing the Power Switch, a message "Power Button Locked" will appear on the screen. 3.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. ENGLISH The monitor is designed to provide the best performance at resolution of 1920 × 1080, but can not provide the best at resolutions of less than 1920 × 1080 because the picture is automatically stretched to fit the full screen.
Adjust the Auto Adjustment. (Auto Adjust) Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
ENGLISH Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern. NOTE and In case the strong flicker or blurs remain on a part of the screen, repeat steps because the Pixel Clock may not be adjusted correctly. Adjust the H.Position after the Phase adjustment if the horizontal position moves during the adjustment. Adjust the Brightness and Color to get the desired picture after you complete the Pixel Clock and Phase adjustments. Put back your favorite wallpaper.
POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor enters into Power Management Mode which reduces the power consumption to less than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power Management Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again. Power Indicator NORMAL MODE POWER MANAGEMENT MODE Blue Orange POWER 0 0.
TROUBLE SHOOTING ENGLISH If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. 3.
Check The screen is shaking. The power voltage is within the specification of the monitor. The signal timing of the computer is within the specification of the monitor. No sound. The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The Mute is ON. The audio output level of the audio equipment is within the specification of the monitor.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS : ProLite XUB2294HSU Size Category ENGLISH Panel technology LCD Panel 22" VA Size Diagonal: 21.5" (54.6cm) Pixel pitch 0.248mm H × 0.248mm V Brightness 250cd/m2 (Typical) Contrast ratio 3000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 89 degrees each, Up / Down : 89 degrees each (Typical) Response time 4ms (Gray to Gray) Display Colors Input Connector Approx.
SPECIFICATIONS : ProLite XUB2294HS LCD Panel 22" Panel technology VA Size Diagonal: 21.5" (54.6cm) Pixel pitch 0.248mm H × 0.248mm V Brightness 250cd/m2 (Typical) Contrast ratio 3000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 89 degrees each, Up / Down : 89 degrees each (Typical) Response time 4ms (Gray to Gray) Display Colors Input Connector Approx. 16.7M VGA : Horizontal: 30.0-83.0kHz, Vertical: 55-75Hz HDMI/DisplayPort : Horizontal: 30.0-85.
SPECIFICATIONS : ProLite XUB2292HS Size Category ENGLISH LCD Panel 22" Panel technology IPS Panel Technology Size Diagonal: 21.5" (54.6cm) Pixel pitch 0.248mm H × 0.248mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 89 degrees each, Up / Down : 89 degrees each (Typical) Response time 4ms (Gray to Gray) Display Colors Input Connector Approx. 16.7M VGA : Horizontal: 30.0-83.
SPECIFICATIONS : ProLite XU2294HSU Panel technology LCD Panel 22" VA Size Diagonal: 21.5" (54.6cm) Pixel pitch 0.248mm H × 0.248mm V Brightness 250cd/m2 (Typical) Contrast ratio 3000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 89 degrees each, Up / Down : 89 degrees each (Typical) Response time 4ms (Gray to Gray) Display Colors Input Connector Approx. 16.7M VGA : Horizontal: 30.0-83.0kHz, Vertical: 55-75Hz HDMI/DisplayPort : Horizontal: 30.0-85.
SPECIFICATIONS : ProLite XU2294HS Size Category ENGLISH LCD Panel 22" Panel technology VA Size Diagonal: 21.5" (54.6cm) Pixel pitch 0.248mm H × 0.248mm V Brightness 250cd/m2 (Typical) Contrast ratio 3000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 89 degrees each, Up / Down : 89 degrees each (Typical) Response time 4ms (Gray to Gray) Display Colors Input Connector Approx. 16.7M VGA : Horizontal: 30.0-83.
SPECIFICATIONS : ProLite XU2292HS LCD Panel 22" Panel technology IPS Panel Technology Size Diagonal: 21.5" (54.6cm) Pixel pitch 0.248mm H × 0.248mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 89 degrees each, Up / Down : 89 degrees each (Typical) Response time 4ms (Gray to Gray) Display Colors Input Connector Approx. 16.7M VGA : Horizontal: 30.0-83.
DIMENSIONS : ProLite XUB2294HSU / ProLite XUB2294HS / ProLite XUB2292HS 488.5mm/19.2” 484.0mm/19.1” ENGLISH 210.0mm/8.3” 273.5mm/10.8” 294.5mm/11.6” 352.0mm/13.9”(482.0mm/19.0”) 380.0mm/15.0” 52.5mm/2.1” 240.0mm/9.4” ( ) : Maximum adjustment range DIMENSIONS: ProLite XU2294HSU / ProLite XU2294HS / ProLite XU2292HS 488.5mm/19.2” 484.0mm/19.1” 187.0mm/7.4” 376.0mm/14.8” 273.5mm/10.8” 294.5mm/11.6” 52.5mm/2.1” 207.0mm/8.
COMPLIANT TIMING 640 × 480 800 × 600 1024 × 768 1280 × 1024 1440 × 900 1680 × 1050 1920 × 1080 640 × 350 720 × 400 Horizontal Frequency 31.469kHz 37.879kHz 48.363kHz 63.981kHz 55.935kHz 65.290kHz 66.590kHz 83.890kHz 31.469kHz 31.469kHz Vertical Frequency 59.940Hz 60.317Hz 60.004Hz 60.020Hz 59.887Hz 60.000Hz 59.930Hz 74.970Hz 70.087Hz 70.087Hz Dot Clock 25.175MHz 40.000MHz 65.000MHz 108.000MHz 106.500MHz 146.250MHz 138.500MHz 174.500MHz 25.175MHz 28.
