User Manual

ENGLISH
OPERATING THE MONITOR 29
1) Adjust the H.Position so that the left side of the picture frame will move to the left edge
of the display area.

When the left side of the picture frame moves apart from the left edge of the display
areaduringthePixelClockadjustment,adjuststeps1)and2).

Another way to make the Pixel Clock adjustment is to correct the vertical wavy lines
in the zebra pattern.

ThepicturemayickerduringthePixelClock,H.PositionandV.Positionadjustment.

In case the picture frame is bigger or smaller than the data display area after the
Pixel Clock adjustment, repeat steps from
.
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Pixel Clock.
Adjust the Auto Adjustment. (Auto Adjust)
 Adjusttheimagemanuallybyfollowingprocedurebelowwhenthescreenhasaickeror
blur,orthepicturedoesnottinthedisplayareaafterperformingtheAutoAdjust.
 AdjusttheV.Positionsothatthetopandbottomofthepictureframewillttothedisplay
area.
NOTE