User Manual

ENGLISH
OPERATING THE MONITOR 19
1) Adjust the H-Position so that the left side of the picture frame will move to the left
edge of the display area.

When the left side of the picture frame moves apart from the left edge of the display
areaduringtheClockadjustment,adjuststeps1)and2).

Another way to make the Clock adjustment is to correct the vertical wavy lines in the
zebra pattern.

ThepicturemayickerduringtheClock,H/V-Positionadjustment.

In case the picture frame is bigger or smaller than the data display area after the
Clock adjustment, repeat steps from
.
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Clock.
Perform the auto adjustment. (Auto Adjust)
 Adjusttheimagemanuallybyfollowingprocedurebelowwhenthescreenhasaickeror
blur,orthepicturedoesnottinthedisplayareaafterperformingtheAutoAdjust.
 AdjusttheV-Positionsothatthetopandbottomofthepictureframewillttothedisplay
area.
NOTE