USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Model No. : PLTF1534, PLTF1734, PLTF1934 We recommend recycling of used product.
TABLE OF CONTENTS FOR YOUR SAFETY.............................................................................1 SAFETY PRECAUTIONS................................................................1 SPECIAL NOTES ON LCD MONITORS..........................................3 ENGLISH CUSTOMER SERVICE....................................................................3 CLEANING.......................................................................................3 BEFORE YOU OPERATE THE MONITOR....................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. ENGLISH DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1024 × 768 : ProLite TF1534MC Supports Resolutions up to 1280 × 1024 : ProLite TF1734MC / ProLite TF1934MC ENGLISH 2 High Contrast 700:1 (Typical) / Brightness 330cd/m (Typical: with Touch panel) : ProLite TF1534MC 2 High Contrast 1000:1 (Typical) / Brightness 315cd/m (Typical: with Touch panel) : ProLite TF1734MC / ProLite TF1934MC Digital Character Smoothing Automatic Set-up Standby Feature (VESA DPMS Compliant) VESA Mou
CHECKING THE CONTENTS OF THE PACKAGE The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office. Power Cable* DisplayPort Cable Safety Guide HDMI Cable Cable Cover Screw (M3x6 1pcs) * 1. TO USERS IN 120V AREA The rating of the Power Cable enclosed in 120V area is 10A/125V.
INSTALLATION WARNING Before installation, make sure the wall, ceiling or desktop arm is strong enough to hold the necessary weight of the display and the mount. WARNING When you use with the wall mounting, in consideration of thickness of the mounting stage, tighten the M4 Screws (4pcs) with washer which “L” length is 8mm(TF1534MC) or 6mm(TF1734MC/TF1934MC) to fasten the monitor.
CONTROLS AND CONNECTORS ENGLISH Remote Control Touch V01* Menu Button (MENU)* Scroll Up / Brightness Button ( Scroll Down / Contrast Button ( )* )* Select Button (SELECT)* Power Switch ( )* Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor from being removed without your permission.
CONNECTING YOUR MONITOR ENGLISH Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the computer to the monitor with the USB Cable. Connect the monitor cable to the Remote Control Touch V01 (option), if necessary. Connect the AC Adapter to the monitor and the Power Cable to the AC Adapter first and then connect to the power source. Turn on your monitor and computer.
[Fitting and Removal of Cable Cover] Step 1 Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down. Cable Cover < Fitting > Connect the cables, as shown in Step2, place the cable cover and fix it firmly using a screw. Step 2 Screw BEFORE YOU OPERATE THE MONITOR 9 ENGLISH < Removal > Remove the cable cover as shown in Step1.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 28: COMPLIANT TIMING. ENGLISH Windows XP/Vista/7/8/8.1/10 Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows XP/Vista/7/8/8.1/10 by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied.
Touch Input Settings in Dual Screen Mode ENGLISH Connect the primary monitor to the computer first. Set Control Panel > Hardware and Sound > Tablet PC Settings > Display > Setup. The following message will appear on the screen. Please follow the instructions. After setting NOTE , connect a second monitor and perform the setup as in . The monitors are recognized as dual-display, and touch operation cannot be performed on two monitors at the same time.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 28. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 18 for SCREEN ADJUSTMENTS. Press the MENU Button to start the On Screen Display feature. There are additional Buttons.
Direct LOCK MODE: Simultaneously press the MENU button and the button when an image is displayed through VGA, HDMI or DisplayPort. * The OSD menu is not displayed when the OSD is locked. Press the MENU button and the button simultaneously again. The following OSD menu is displayed. POWER OSD Problem / Option Active The POWER SWITCH is Locked. Inactive The POWER SWITCH is Unlocked. Active The OSD menu is Locked. Inactive The OSD menu is Unlocked.
ADJUSTMENT MENU CONTENTS Picture Picture Advanced OSD Option Contrast Brightness H-Position V-Position ENGLISH Phase Clock Auto Adjust Adjustment Item Problem / Option Contrast Direct Too dull Too intense Brightness*1 Direct Too dark Too bright H-Position*4 Too left Too right V-Position*4 Too low Too high Phase*2,4 Clock*2,4 Auto Adjust*3,4 Button to Press To correct flickering text or lines Too narrow Too wide Adjust H/V-Position, Clock and Phase automatically.
Advanced Picture Advanced OSD Color Temp Option User Red Green Blue Adjustment Item Color Temp Sharpness Problem / Option Button to Press Greenish white Reddish white Yellowish white Bluish white Red Too weak Green User Too strong Blue You can change the picture quality from 0 to 100 (soft to sharp). Press the Button to change the picture quality in numerical order. Press the Button to change the picture quality in reverse numerical order.
OSD Picture Advanced OSD Option OSD Timeout OSD Position User OSD H-Position OSD V-Position ENGLISH Touch Switch Adjustment Item Normal Problem / Option Button to Press OSD Timeout You can set the OSD display duration time between 5 and 60 seconds. OSD Position You can set the OSD position.
Option Picture Advanced OSD Option Reset English Language VGA Source Select DisplayMode Adjustment Item Problem / Option No Reset Language Direct Return to Menu. Yes Factory-preset data is restored. English Français Deutsch Italiano Español Spanish English Japanese French 繁中 Traditional Chinese German 中 Italian Simplified Chinese Search for an available input source and select automatically. Auto Source Select Button to Press VGA Select the analog input.
SCREEN ADJUSTMENTS ENGLISH Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use.
Perform the auto adjustment. (Auto Adjust) Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH Adjust the V-Position so that the top and bottom of the picture frame will fit to the display area. 1) Adjust the H-Position so that the left side of the picture frame will move to the left edge of the display area.
ENGLISH Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern. NOTE and In case the strong flicker or blurs remain on a part of the screen, repeat steps because the Clock may not be adjusted correctly. Adjust the H-Position after the Phase adjustment if the horizontal position moves during the adjustment. Adjust the Brightness and Color to get the desired picture after you complete the Clock and Phase adjustments. Put back your favorite wallpaper.
STANDBY FEATURE Standby Mode When the video signal from the computer is off, the monitor enters into Standby Mode which reduces the power consumption to less than 1.5W*. The screen becomes dark. From Standby Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again. NORMAL MODE STANDBY MODE POWER 0 1.5W* CONSUMPTION 100% * USB peripherals is not connected. NOTE Even when using the standby mode, the monitor consumes electricity.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. 3.
RECYCLING INFORMATION ENGLISH For better environment protection please don't dispose your monitor. Please visit our web site: www.iiyama.com for monitor recycling.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS : ProLite TF1534MC-B7X ENGLISH Touch Screen Technology Projected capacitive 10pt touch Light transmission 90% Communication system USB Surface finish Anti fingerprint coating Size Category LCD Panel 15" Panel technology TN Size Diagonal: 15" (38cm) Pixel pitch Contrast ratio 0.297mm H × 0.
SPECIFICATIONS : ProLite TF1734MC-B7X Projected capacitive 10pt touch 90% Communication system USB Surface finish Anti fingerprint coating Size Category LCD Panel 17" Panel technology TN Size Diagonal: 17" (43cm) Pixel pitch Contrast ratio 0.264mm H × 0.
SPECIFICATIONS : ProLite TF1934MC-B7X Touch Screen Technology Projected capacitive 10pt touch Light transmission 90% Communication system USB Surface finish Anti fingerprint coating ENGLISH Size Category LCD Panel 19" Panel technology IPS Size Diagonal: 19" (48cm) Pixel pitch Contrast ratio 0.294mm H × 0.
DIMENSIONS : ProLite TF1534MC 337.5mm/13.3” 305.0mm/12.0” ENGLISH 229.0mm/9.0” 265.5mm/10.5” 44.5mm/1.7” DIMENSIONS : ProLite TF1734MC 369.0mm/14.5” 339.0mm/13.3” 271.5mm/10.7” 307.0mm/12.1” 47.5mm/1.9” DIMENSIONS : ProLite TF1934MC 416.0mm/16.4” 377.5mm/14.9” 302.0mm/11.9” 344.0mm/13.5” 46.5mm/1.
COMPLIANT TIMING Video Mode 640 × 480 ENGLISH 800 × 600 1024 × 768 1280 × 1024 Horizontal Frequency 31.469kHz 37.500kHz 37.861kHz 35.156kHz 37.879kHz 46.875kHz 48.077kHz 48.363kHz 56.476kHz 60.023kHz 63.981kHz 79.976kHz Vertical Frequency 59.940Hz 75.000Hz 72.809Hz 56.250Hz 60.317Hz 75.000Hz 72.188Hz 60.004Hz 70.069Hz 75.029Hz 60.020Hz 75.025Hz Dot Clock 25.175MHz 31.500MHz 31.500MHz 36.000MHz 40.000MHz 49.500MHz 50.000MHz 65.000MHz 75.000MHz 78.750MHz 108.000MHz 135.
