User Manual

ENGLISH
16 OPERATING THE MONITOR
Too left
Too right
Too low
Too high
Too narrow
Too wide
Tocorrectickeringtextorlines
*
1
Only Analog Input.
*
2
See page 19 for SCREEN ADJUSTMENTS.
*
3
It can display in the center of the screen with a 4:3, 5:4 or 16:10 aspect ratio when input video
resolution is 4:3, 5:4 or 16:10.
*
4
Blue Light Reducer is disabled when Color Adjust is activated.
Full Screen
Expansion display of Aspect
Adjustment Item Problem / Option Button to Press
Manual Image Adjust
Clock *
1
H./V. Position *
1,2
H. Position
V. Position
Phase *
1
Sharpness
Aspect Ratio *
3
Video Mode Adjust
Full screen display
1 / 2 / 3 / 4 / 5
Youcanchangethepicturequalityfrom1to5(softtosharp).
Press the Button to change the picture quality in numerical
order. Press the Button to change the picture quality in
reverse numerical order.
Adjust the picture quality at resolutions of less 1920×1080.
Youcanchangethepicturequality(5steps).
Manual Image Adjust
Blue Light Reducer *
4
O󰀨
Typical
1
Blue light is reduced.
2
Blue light is reduced more than mode "1".
3
Blue light is reduced more than mode "2".
Direct
Enhance the picture edge.
O󰀨 Normal
Soft
Enhance the picture edge more than the
Middle option.
Hard
X-Res Technology
Enhance the picture edge more than the Soft option.
Middle
Direct
You can skip the Menu items and directly display an option settting screen by using the following
button operations.

Blue Light Reducer: Pressing and holding of the Button for about 2 seconds when the Menu is
not displayed.