User Manual

ENGLISH
10 BEFORE YOU OPERATE THE MONITOR
ADJUSTING THE VIEWING ANGLE

For optimal viewing it is recommended to look at the
full face of the monitor.

You are able to adjust the monitor’s angle up to 15 -
70 degrees upward.

Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitoratonatablewithfrontfacedown.

Hold the monitor and pull the stand up until you
hear a click.
Stand the monitor in the upright position. Adjust the
screen tilt to your preference.
NOTE

Do not touch the LCD screen when you
change the angle. It may cause damage or
break the LCD screen.

Careful attention is required not to pinch
yourngersorhandsintothemovingpartof
the stand when you change the angle.

When packaged, the stand is folded. Do not
use in this state otherwise injury may occur if
it falls or is dropped.
15°
70°