USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
ENGLISH TABLE OF CONTENTS FOR YOUR SAFETY..........................................................................1 SAFETY PRECAUTIONS..............................................................1 SPECIAL NOTES ON LCD MONITORS .......................................3 CUSTOMER SERVICE .................................................................3 CLEANING ....................................................................................3 BEFORE YOU OPERATE THE MONITOR ...............................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. ENGLISH DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1024 × 768 : ProLite T1531SR / ProLit T1531SAW / ProLite T1532SR ENGLISH Supports Resolutions up to 1280 × 1024 : ProLite T1731SR / ProLite T1731SAW / ProLite T1931SR / ProLite T1931SAW 2 High Contrast 700:1 (Typical) / Brightness 300cd/m (Typical: with Touch panel) : ProLite T1531SR / ProLite T1532SR 2 High Contrast 700:1 (Typical) / Brightness 340cd/m (Typical: with Touch panel) : ProLit T1531SAW 2 High Contrast 1000:1 (Typical
CHECKING THE CONTENTS OF THE PACKAGE The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office. 1 HDMI Cable Power Cable* USB Cable Audio Cable Touch Panel Driver Disk (CD-ROM)*2 Quick Start Guide *1 The rating of the Power Cable enclosed in 120V area is 10A/125V.
ENGLISH CONTROLS AND CONNECTORS Menu Button ( ) Scroll Up / Brightness Button ( Scroll Down / Mute Button ( Select Button ( ) Power Switch ( ) ) ) Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor from being removed without your permission.
CONNECTING YOUR MONITOR NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office. For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama office for a suitable adaptor.
ENGLISH COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 29: COMPLIANT TIMING. Windows XP/Vista/7/8/8.1/10 Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows XP/Vista/7/8/8.1/10 by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 29. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 15 for SCREEN ADJUSTMENTS. Press the Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the / Buttons. ENGLISH C ON TR A ST B R IGH TN ESS 1280x1024 FH: 63KHz FV: 59.
ADJUSTMENT MENU CONTENTS C ON TR A ST B R IGH TN ESS ENGLISH 1280x1024 FH: 63KHz FV: 59.9Hz Adjustment Item Button to Press Too dull Too intense CONTRAST BRIGHTNESS * Problem / Option Direct Too dark Too bright * Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. BRIGHTNESS: Press the Button when the Menu is not displayed.
Adjustment Item AUTO ADJUST *1 A U TO A D J U S T H - P O S I TI O N V- P O S I TI O N H - S I ZE FI N E Problem / Option Adjust H/V-POSITION, H-SIZE and FINE automatically. H-POSITION Too left Too right V-POSITION Too low Too high H-SIZE *2 Too narrow Too wide FINE *2 Button to Press To correct flickering text or lines *1 For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 15 for SCREEN ADJUSTMENTS. *2 See page 15 for SCREEN ADJUSTMENTS.
OSD H-POSITION OSD V-POSITION OSD TIMEOUT RESET INPUT SELECT ENGLISH Adjustment Item Problem / Option OSD H-POSITION OSD is too left OSD is too right OSD V-POSITION OSD is too low OSD is too high OSD TIMEOUT You can set the OSD display duration time between 5 and 60 seconds. RESET Factory-preset data is restored. INPUT SELECT Direct Button to Press Auto Search for an available input source and select automatically. VGA Select the analog input. HDMI Select the digital(HDMI) input.
ESPAÑOL Adjustment Item OSD LANGUAGE Problem / Option ENGLISH FRANÇAIS DEUTSCH ITALIANO 9300 6500 5500 7500 USER Adjustment Item COLOR TEMP.
VOLUME MUTE ENGLISH Adjustment Item Button to Press Too soft Too loud VOLUME MUTE Problem / Option ON Turn off the sound temporarily. OFF Return the sound volume to the previous level. Direct Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. MUTE : Press the Button when the Menu is not displayed.
SCREEN ADJUSTMENTS The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. The monitor is designed to provide the best performance at resolution of 1280 × 1024, but can not provide the best at resolutions of less than 1280 × 1024 because the picture is automatically stretched to fit the full screen. It is recommended to operate at resolution of 1280 × 1024 in normal use.
Press the Button. (AUTO ADJUST) Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH Adjust the V-POSITION so that the top and bottom of the picture frame will fit to the display area. 1) Adjust the H-POSITION so that the left side of the picture frame will move to the left edge of the display area.
NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps and because the H-SIZE may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from again. Adjust the H-POSITION after the FINE adjustment if the horizontal position moves during the adjustment. Adjust the Brightness and Color to get the desired picture after you complete the H-SIZE and FINE adjustments. Put back your favorite wallpaper.
POWER MANAGEMENT FEATURE ENGLISH The power management feature of this product complies with power saving requirement of VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below. The power management function, including any timer settings is configured by the operating system.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. Problem Check The Power Cable is firmly seated in the socket. The picture does not appear. The Power Switch is turned ON. The AC socket is live. Please check with another piece of equipment. If the blank screen saver is in active mode, touch the keyboard or the mouse. Increase the Contrast and/or Brightness. The computer is ON. The Signal Cable is properly connected.
RECYCLING INFORMATION ENGLISH For better environment protection please don't dispose your monitor. Please visit our web site: www.iiyama.com/recycle for monitor recycling.
APPENDIX SPECIFICATIONS : ProLite T1531SR Technology Surface processing Light transmission Communication system Size Category LCD Panel Resistive-Film Anti-glare treatment 80% USB serial transfer 15" Panel technology TN Size Diagonal: 15" (38cm) Pixel pitch Contrast ratio 0.297mm H × 0.
SPECIFICATIONS : ProLite T1531SAW Technology Touch Screen Surface processing Light transmission Communication system ENGLISH Size Category LCD Panel Surface acoustic wave Anti-glare treatment 92% USB serial transfer 15" Panel technology TN Size Diagonal: 15" (38cm) Pixel pitch Contrast ratio 0.297mm H × 0.
SPECIFICATIONS : ProLite T1532SR Technology Surface processing Light transmission Communication system Size Category LCD Panel Resistive-Film Anti-glare treatment 80% USB serial transfer 15" Panel technology TN Size Diagonal: 15" (38cm) Pixel pitch Contrast ratio 0.297mm H × 0.
SPECIFICATIONS : ProLite T1731SR Technology Touch Screen Surface processing Light transmission Communication system ENGLISH Size Category LCD Panel Resistive-Film Anti-glare treatment 80% USB serial transfer 17" Panel technology TN Size Diagonal: 17" (43cm) Pixel pitch Contrast ratio 0.264mm H × 0.
SPECIFICATIONS : ProLite T1731SAW Technology Surface processing Light transmission Communication system Size Category LCD Panel Surface acoustic wave Anti-glare treatment 92% USB serial transfer 17" Panel technology TN Size Diagonal: 17" (43cm) Pixel pitch Contrast ratio 0.264mm H × 0.
SPECIFICATIONS : ProLite T1931SR Technology Touch Screen Surface processing Light transmission Communication system ENGLISH Size Category LCD Panel Resistive-Film Anti-glare treatment 80% USB serial transfer 19" Panel technology TN Size Diagonal: 19" (48cm) Pixel pitch Contrast ratio 0.294mm H × 0.
SPECIFICATIONS : ProLite T1931SAW Technology Surface processing Light transmission Communication system Size Category LCD Panel Surface acoustic wave Anti-glare treatment 92% USB serial transfer 19" Panel technology TN Size Diagonal: 19" (48cm) Pixel pitch Contrast ratio 0.294mm H × 0.
DIMENSIONS : ProLite T1531SR / ProLite T1531SAW / ProLite T1532SR 351.0mm/13.8" 306.0mm/12.0" 201.0mm/7.9" 306.0mm/12.0" 222.5mm/8.8" DIMENSIONS : ProLite T1731SR / ProLite T1731SAW 387.0mm/15.2" 340.0mm/13.4" 59.0mm/2.3" 201.0mm/7.9" 342.0mm/13.5" 272.0mm/10.7" 320.0mm/12.6" 222.5mm/8.8" DIMENSIONS : ProLite T1931SR / ProLite T1931SAW 432.0mm/17.0" 378.0mm/14.9" 249.5mm/9.8" 28 APPENDIX 218.0mm/8.6" 390.0mm/15.4" 59.0mm/2.3" 303.0mm/11.9" 358.0mm/14.1" ENGLISH 230.0mm/9.1" 275.0mm/10.
COMPLIANT TIMING VGA 640 × 480 SVGA 800 × 600 XGA 1024 × 768 SXGA 1280 × 1024 VESA Horizontal Frequency 31.469kHz 37.500kHz 37.861kHz 35.156kHz 37.879kHz 46.875kHz 48.077kHz 48.363kHz 56.476kHz 60.023kHz 63.981kHz 79.976kHz Vertical Frequency 59.940Hz 75.000Hz 72.809Hz 56.250Hz 60.317Hz 75.000Hz 72.188Hz 60.004Hz 70.069Hz 75.029Hz 60.020Hz 75.025Hz Dot Clock 25.175MHz 31.500MHz 31.500MHz 36.000MHz 40.000MHz 49.500MHz 50.000MHz 65.000MHz 75.000MHz 78.750MHz 108.000MHz 135.
