USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
Congratulations! for Sustainable IT TCO Certified is an international third party sustainability certification for IT products. TCO Certified ensures that the manufacture, use and recycling of IT products reflect environmental, social and economic responsibility. Every TCO Certified product model is verified by an accredited independent test laboratory.
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
TABLE OF CONTENTS FOR YOUR SAFETY............................................................................1 SAFETY PRECAUTIONS................................................................1 SPECIAL NOTES ON LCD MONITORS .........................................3 CLEANING ......................................................................................3 BEFORE YOU OPERATE THE MONITOR ..........................................4 FEATURES................................................................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION ENGLISH The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. You may find slightly uneven brightness on the screen depending on the desktop pattern you use. Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1920 × 1080 High Contrast 3000:1 (Typical), Adv. Contrast Function Available / Brightness 300cd/m2 (Typical) ENGLISH Blue Light Reducer Digital Character Smoothing Automatic Set-up Stereo Speakers 2 × 2W Stereo Speakers Plug & Play VESA DDC2B Compliant Windows® 7/8.
WALL MOUNTING When you use with the wall mounting, in consideration of thickness of the mounting WARNING stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor. Please check if the wall or ceiling can support the weight of the monitor before mounting it.
FITTING AND REMOVAL OF BASE : ProLite XB2783HSU CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. ENGLISH Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
FITTING AND REMOVAL OF BASE : ProLite X2783HSU CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. ENGLISH Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
ENGLISH CONTROLS AND CONNECTORS : ProLite XB2783HSU Power Indicator NOTE Blue: Normal operation Orange: Power Management Power Switch ( ) Menu / Select Button (MENU) Scroll Up / Volume Button ( / ) Scroll Down / ECO Mode Button ( / ) Exit Button (EXIT) Input Select Button (INPUT) Speakers USB Downstream Connector ( ) USB Downstream Connector ( USB Upstream Connector ( ) ) VGA Connector (D-SUB) HDMI Connector (HDMI) DisplayPort Connector (DP) Keyhole for Security Lock NOTE You
Power Indicator NOTE Blue: Normal operation Orange: Power Management Power Switch ( ) Menu / Select Button (MENU) Scroll Up / Volume Button ( / ) Scroll Down / ECO Mode Button ( / ) Exit Button (EXIT) Input Select Button (INPUT) Speakers USB Downstream Connector ( ) USB Downstream Connector ( USB Upstream Connector ( ) ) VGA Connector (D-SUB) HDMI Connector (HDMI) DisplayPort Connector (DP) Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the mo
CONNECTING YOUR MONITOR : ProLite XB2783HSU Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power supply. Turn on your monitor and computer. ENGLISH NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used.
CONNECTING YOUR MONITOR : ProLite X2783HSU NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 31: COMPLIANT TIMING. ENGLISH ADJUSTING THE VIEWING ANGLE : ProLite X2783HSU For optimal viewing it is recommended to look at the full face of the monitor. Hold the stand so that the monitor does not topple when you change the monitor’s angle. You are able to adjust the monitor’s angle up to 22° upward, 5° downward.
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite XB2783HSU For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to your own preference. Hold the panel so that the monitor does not topple when you change the monitor’s height or angle. 130mm ENGLISH You are able to adjust the monitor's height up to 130mm, angle up to 45 degrees right and left, 22 degrees upward and 5 degrees downward.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 31. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 22 for SCREEN ADJUSTMENTS. ENGLISH Press the ENTER Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the / Buttons.
ADJUSTMENT MENU CONTENTS Picture Adjust *3 Problem / Option Button to Press Contrast *2 Too dull Too intense Brightness *1,2,4 Too dark Too bright Overdrive Off / +1 / +2 It will improve the gray level response time of the LCD panel. A higher level results in a faster response time. Adv. Contrast ECO Mode Blue Light Reducer Direct Off Typical Contrast Ratio On Increased Contrast Ratio Off Normal Mode1 Brightness of back-light is reduced.
Input Select Adjustment Item Input Select Direct Problem / Option Select the Analog input. HDMI Select the Digital (HDMI) input. DisplayPort Select the Digital (DisplayPort) input. Search for an available input source and select automatically. Auto ENGLISH Button to Press VGA NOTE Input source is fixed, not selected automatically when VGA, HDMI and DisplayPort which are selected. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations.
Color Adjust Adjustment Item Cool *1 Normal *1 Button to Press Greenish white 1 Reddish white Red Green User Color *1 Blue Off Standard i-Style Color * 2 Game Too weak Too strong Return to a state set by color adjustment except i-Style Color. For general windows environment and monitor default setting. For PC game environment. Cinema For movie and video environment. Scenery For displaying outdoor scenery images Text For text editing and viewing in a word processing environment.
Image Adjust Adjustment Item ENGLISH Auto Adjust *1,2 Problem / Option Direct Adjust H. / V. Position, Clock and Phase automatically. H. Position *2 Too left Too right V. Position *2 Too low Too high Clock *2 Too narrow Too wide Phase *2 Button to Press To correct flickering text or lines 12345 Sharpness Video Mode Adjust You can change the picture quality from 1 to 5 (sharp to soft). Press the Button to change the picture quality in numerical order.
Language Language Problem / Option English Français Deutsch Italiano Polski Español English French German Italian Polish Spanish Button to Press Nederlands Dutch Czech Ĉesky Russian Japanese Simplified Chinese ENGLISH Adjustment Item Setup Adjustment Item Problem / Option H.Position OSD is too left OSD is too right V.
Display Information Displays information regarding the current input signal coming from the graphic card in your computer. Display Information ENGLISH 1920x1080 @60Hz NOTE See your graphic card user guide for more information about changing the resolution and refresh. Reset Adjustment Item Reset All 20 OPERATING THE MONITOR Problem / Option No Return to Menu. Yes Factory-preset data is restored.
● Lock Mode 1. The OSD lock will be activated by pressing the front button ENTER for about 10 seconds. If you try to access the OSD by pressing any of the buttons, message "OSD Locked" will appear on the screen. 2. The OSD lock will be deactivated by pressing the front button ENTER again for about 10 seconds. 1. The power switch lock will be activated by pressing the front button for about 10 seconds.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. ENGLISH The monitor is designed to provide the best performance at resolution of 1920 × 1080, but can not provide the best at resolutions of less than 1920 × 1080 because the picture is automatically stretched to fit the full screen.
Press the AUTO Button. (Auto Adjust) Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
ENGLISH Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern. NOTE and In case the strong flicker or blurs remain on a part of the screen, repeat steps because the Pixel Clock may not be adjusted correctly. Adjust the H.Position after the Phase adjustment if the horizontal position moves during the adjustment. Adjust the Brightness and Color to get the desired picture after you complete the Pixel Clock and Phase adjustments. Put back your favorite wallpaper.
POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor enters into Power Management Mode which reduces the power consumption to less than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power Management Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again. Power Indicator NORMAL MODE POWER MANAGEMENT MODE Blue Orange POWER 0 0.
TROUBLE SHOOTING ENGLISH If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. 3.
Check The screen is shaking. The power voltage is within the specification of the monitor. The signal timing of the computer is within the specification of the monitor. No sound. The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The Mute is OFF. The audio output level of the audio equipment is within the specification of the monitor.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS : ProLite XB2783HSU ENGLISH Size Category LCD Panel 27" Panel technology AMVA+ Size Diagonal: 27" (68.6cm) Pixel pitch 0.311mm H × 0.311mm V Brightness 300cd/m2 (Typical) Contrast ratio 3000 : 1 (Typical), Adv.
SPECIFICATIONS : ProLite X2783HSU Size Category AMVA+ Size Diagonal: 27" (68.6cm) Pixel pitch 0.311mm H × 0.311mm V Brightness 300cd/m2 (Typical) Contrast ratio 3000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 89 degrees each, Up / Down : 89 degrees each (Typical) Response time 4ms (Gray to Gray) Display Colors 16,777,216 Sync Frequency Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz Native Resolution Input Connector 1920 × 1080, 2.
DIMENSIONS : ProLite XB2783HSU 622.5mm/24.5” 599.5mm/23.6” ENGLISH 300.0mm/11.8” ( 230.0mm/9.1” 338.0mm/13.3” 372.5mm/14.7” 400.5mm/15.8”(530.5mm/20.9”) 56.5mm/2.2” ) : Maximum adjustment range DIMENSIONS : ProLite X2783HSU 622.5mm/24.5” 599.5mm/23.6” 255.0mm/10.0” 30 APPENDIX 218.0mm/8.6” 446.0mm/17.6” 338.0mm/13.3” 372.5mm/14.7” 56.5mm/2.
COMPLIANT TIMING VESA VGA TEXT VGA SVGA XGA SXGA WXGA+ WSXGA+ 640 × 480 800 × 600 1024 × 768 1280 × 1024 1440 × 900 1680 × 1050 Full HD 1920 × 1080 640 × 350 720 × 400 Horizontal Frequency 31.469kHz 37.879kHz 48.363kHz 63.981kHz 55.935kHz 65.290kHz 66.590kHz 83.890kHz 31.469kHz 31.469kHz Vertical Frequency 59.940Hz 60.317Hz 60.004Hz 60.020Hz 59.887Hz 60.000Hz 59.930Hz 74.970Hz 70.087Hz 70.087Hz Dot Clock 25.175MHz 40.000MHz 65.000MHz 108.000MHz 106.500MHz 146.250MHz 138.500MHz 174.500MHz 25.
