USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. ENGLISH IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands Model No.
TABLE OF CONTENTS FOR YOUR SAFETY.............................................................................1 SAFETY PRECAUTIONS................................................................1 SPECIAL NOTES ON LCD MONITORS..........................................3 BEFORE YOU OPERATE THE MONITOR...........................................6 FEATURES......................................................................................6 CHECKING THE CONTENTS OF THE PACKAGE.........................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. ENGLISH DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE - When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. - You may find slightly uneven brightness on the screen depending on the desktop pattern you use. - Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours.
USAGE CONFIRMATION This product is designed for optimum usage at 24hours per day. The display is compatible for usage in Landscape/Portrait and Tabletop (face-up) applications. If being used in Tabletop application, please utilise the Fan-on function. IMAGE PERSISTENCE / IMAGE STICKING ENGLISH Please be aware that all LCD screens can experience Image Persistence or Image Sticking. This occurs when a residual image remains visible on a screen when static images are displayed for long periods of time.
CUSTOMER SERVICE NOTE If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for advice or replacement packaging. WARNING If you drop any materials or liquids such as water into the monitor when cleaning, unplug the power cable immediately and contact your dealer or iiyama service center. CAUTION For safety reasons, turn off the power switch and unplug the monitor before you clean it.
BEFORE YOU OPERATE THE MONITOR FEATURES Pixel format 3840 × 2160 (RGBW) 2 High Contrast 1000:1 (Typical) / Brightness 500cd/m (Typical: without Touch panel) ENGLISH Digital Character Smoothing Automatic Set-up Stereo Speakers 2 × 8W Stereo Speakers Plug & Play VESA DDC2B Compliant Windows® 7/8.
UNPACKING Before unpacking your monitor, prepare a stable, level, and clean surface near a wall outlet. Set the LCD Monitor box in an upright position and open from the top of the box before removing the top cushions. Remove the carton holders. Pinch and Pull the Knob. CAUTION Moving the monitor requires at least two people. If not, it may drop and could result in a serious injury. When moving/shipping the monitor, please hold by the carton holders.
CONTROLS AND CONNECTORS : MONITOR POWER UP DOWN LEFT/AUTO RIGHT/SELECT MENU ENGLISH LED IR POWER Power Button UP Up/Volume - Button DOWN Down/Volume + Button LEFT / AUTO Left/Auto Button RIGHT / SELECT Right/Input Select Button MENU Menu Button LED Green Normal Operation Orange Power Management IR Remote Sensor SPEAKERS Speakers AC IN AC-INLET AC Connector( AC SWITCH (ON) / (OFF) MAIN POWER Main Power Switch USB USB Touch USB Connector RS232 RS232C 9pi
INSTALLATION CAUTION ENGLISH Follow the manual instructions for the type of mount you have selected. Refer all servicing to qualified service personnel. Moving the monitor requires at least two people. Before installing, please make sure the wall is strong enough to hold the necessary weight of the display and the mount. [WALL MOUNTING] Mounting Stage Screw L Chassis CAUTION When using the wall mounting, consideration of thickness of the mounting stage needs to be taken.
[ROTATING THE DISPLAY] It is designed to be compatible in both landscape and portrait modes.
CONTROLS AND CONNECTORS : REMOTE CONTROL (For maintenance) POWER MUTE MEMU AUTO OK ENGLISH PLAY VOL EXIT STOP SELECT NOTE To use the remote control we advise you to position it at the back of the monitor (left side) where the remote sensor is located. It might not work if you use it standing in front of the monitor. POWER Turns the monitor ON and OFF. MENU Opens the monitor’s on-screen menu systems. When the menu system is already open, pressing this button will select the previous submenu.
PREPARING THE REMOTE CONTROL To use the remote control, insert the button battery. CAUTION Do not use any other batteries other than those specified in this manual for the Remote Control. Burst batteries or the electrolyte from these batteries may cause stains, fire or injury. ENGLISH Push Lock to right and remove the battery case in the direction of the arrow. Put it in face up the + side of the button battery (CR2025). Button Battery Replace the battery case in the direction of the arrow.
BASIC OPERATION Turning the monitor ON The monitor is on and the Power Indicator turns Green when you press the Power Button on the monitor or the Remote Control. The monitor is off and the Power Indicator turns Orange when you press the Power Button on the monitor or the Remote Control. Press again to turn the monitor on.
Move the cursor vertically Select adjustment by pressing the UP / DOWN Button on the monitor or the Remote Control while the menu page is displayed on the screen.
Adjust the volume of sound Press the UP / DOWN Button on the Monitor or the VOL / Button on the Remote Control to adjust the volume of sound when the menu page is not displayed on the screen. [Monitor] POWER UP [Remote Control] POWER MUTE MEMU AUTO OK DOWN PLAY VOL EXIT ENGLISH LEFT/AUTO STOP SELECT RIGHT/SELECT MENU LED IR Switch the input signal This is activated when you successively press the SELECT Button on the monitor or the Remote Control.
ENGLISH CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the computer to the monitor with the USB Cable. Connect the IR Extender Cable to the monitor, peel off the double-sided tape in the back of the IR Receiver and stick it to your preferred location. Connect the Power Cable to the monitor first and then to the power supply.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 38: COMPLIANT TIMING. MULTI-TOUCH This monitor complies with DDC2B of VESA standard. (Plug&play compliant) The MULTI-TOUCH function runs on Windows7/8/8,1/10 by connecting the monitor to DDC2B compliant computer with the USB cable supplied. MULTI-TOUCH support operation system Microsoft Windows 7 (64 bit and 32 bit) Microsoft Windows 8/8,1/10 (64 bit and 32 bit) Linux (3.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 38. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 30 for SCREEN ADJUSTMENTS. Press the MENU Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the / Buttons.
LOCK MODE: Pressing and holding the MENU button and the UP button for about 3 seconds when the Menu is not displayed. 1.Press the SELECT button when the menu is not displayed. button, button, button, button. 2.Press the * To release the Remocon Lock, display the LOCK MODE menu with the OSD key and release it. Adjustment Item OSD Lock Power Key Lock Remocon Lock Problem / Option On The OSD menu is Locked. Off The OSD menu is Unlocked.
ADJUSTMENT MENU CONTENTS PICTURE Picture Mode Color Temperature Aspect Ratio PC Gamma PICTURE ENGLISH Backlight Adjustment Item Problem / Option Vivid Standard Soft Picture Mode User Color Temperature For displaying outdoor scenery images. For general windows environment and monitor default setting. For displaying softly outline images.
PICTURE Picture Mode Color Temperature Aspect Ratio PC Gamma PICTURE Backlight Problem / Option Auto Adjust *5 Horizontal Pos. PC *4 Vertical Pos. Size Phase Button to Press Adjusts Position, Size and Phase automatically. Too far to the left Too far to the right Too low Too high Too narrow Too wide To correct flickering text or lines Gamma *6 You can set the Gamma. 1.8 / 2.2 Backlight Brightness of back light is reduced. *4 Only PC-RGB(VGA) input.
SCHEDULE Date and Time Off Time On Time Reset SCHEDULE ENGLISH Adjustment Item Problem / Option Button to Press Date and Time Adjust the current date and time for the internal clock. Date / Month / Year / Hour / Minute Off Time Sets a recurring schedule. Off / Once / Every Day / Mon. - Fri. / Mon. - Sat. / Sat. - Sun. / Sunday Hour / Minute On Time Sets a recurring schedule. Off / Once / Every Day / Mon. - Fri. / Mon. - Sat. / Sat. - Sun.
OPTION OSD Language Restore Factory Default Color Range Transparency Fan OPTION Mute Opening Logo Anti Image retention OSD Language Restore Factory Defalut Color Range *2,3 Transparency Fan *1,2 Mute *2 Opening Logo *2 Anti Image retention *2 Problem / Option English Français Español Deutsch Button to Press Yes English Nederlands Polski French Pусский Spanish German Italiano Factory-preset data is restored. No Return to Menu.
Applications Media Player Applications ENGLISH Adjustment Item Media Player Problem / Option Button to Press Go to the Media Player menu. [Play Multimedia Files] You can play photos, music, movies and texts on your monitor from: · A USB device connected to this monitor. Play multimedia files from USB device To play files on an external USB storage device, simply plug the device into the USB A jack on the monitor. 1. Connect your USB device to the USB port on this monitor. 2.
Audio Codec MPEG1/2 Layer1 Sample rate 16KHz - 48KHz Channel Up to 2 Bit Rate 32Kbps - 448Kbps MPEG1/2 Layer2 16KHz - 48KHz Up to 2 8Kbps - 384Kbps MPEG1/2 Layer3 16KHz - 48KHz Up to 2 8Kbps - 320Kbps Container Movie: AVI(.avi), ASF(.asf), DivX(.divx), Matroska(.mkv), MPEG transport stream(.ts, .trp, .tp), MPEG program stream(.DAT, .VOB, .MPG, .MPEG) Music: WAV(.wav), MP3(.mp3) Movie: AVI(.avi), ASF(.asf), DivX(.divx), Matroska(.mkv), MPEG transport stream(.ts, .trp, .tp), MPEG program stream(.
Viewing Photo files 1.Select "Photo" and press the OK button, then select "C" and press the OK button. Photo Music Movie TEXT Return C ENGLISH 2.Select the Photo file and press the OK button. Cat.jpg Strawberry.jpg Flower1.jpg Cat.jpg Flower1.jpg Strawberry.jpg Resolution : Dog.jpg Flower2.jpg Dog.jpg 1024 x 768 Size : 859 Kbytes Date : 2017 / 05 / 24 Time : 13 : 59 : 26 Flower2.jpg Flower1.jpg Play Prev.
Playing Music files 1.Select "Music" and press the OK button, then select "C" and press the OK button. Return C Music sample1.mp3 Music sample2.mp3 Music sample3.mp3 Music sample1.mp3 Music sample2.mp3 ENGLISH 2.Select the Music file and press the OK button. Music sample3.mp3 Album : Music Title : Music sample3 Bit Rate : 192K Artst : iiyama Sampling : 44K Year : 2017 Size : 4730KBytes Music sample3.mp3 Play FB FF Prev.
Playing Movie files 1.Select "Movie" and press the OK button, then select "C" and press the OK button. Return C ENGLISH 2.Select the Movie file and press the OK button. Movie sample1.mkv Movie sample2.mkv Movie sample1.mkv Movie sample2.mkv Resolution : 1920 x 808 Audio Track : 1/1 Subtitle : OFF Program : -- / 0 Size : 2314511 KBytes Movie sample2.mkv Play FB FF Prev. Next Stop Repeat Random off • Menu Display : Press the OK button on the remote control.
Viewing Text files 1.Select "Text" and press the OK button, then select "C" and press the OK button. C Return ENGLISH 2.Select the Text file and press the OK button. Language list English Deutsch Français Nederlands Text sample1.txt Text sample2.txt Text sample1.txt Polski Text sample2.txt Size : 218 KBytes Русский Česky Italiano ... Text sample2.txt Prev Page Next Page Prev. Next Stop Music Playlist Info • Menu Display : Press the OK button on the remote control.
SCREEN ADJUSTMENTS ENGLISH Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. The monitor is designed to provide the best performance at resolution of 1920 × 1080, but can not provide the best at resolutions of less than 1920 × 1080 because the picture is automatically stretched to fit the full screen.
Adjust the Auto Adjustment. Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH Adjust the V-Position so that the top and bottom of the picture frame will fit to the display area. 1) Adjust the H-Position so that the left side of the picture frame will move to the left edge of the display area.
ENGLISH Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern. NOTE and In case the strong flicker or blurs remain on a part of the screen, repeat steps because the Clock Frequency may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from again. Adjust the H-Position after the Phase adjustment if the horizontal position moves during the adjustment.
POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor enters into Power Management Mode which reduces the power consumption to less than 0.5W. The screen becomes dark. From Power Management Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again. Power Indicator NORMAL MODE Green POWER MANAGEMENT MODE Orange POWER 0 0.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. 3.
RECYCLING INFORMATION ENGLISH For better environment protection please don't dispose your monitor. Please visit our web site: www.iiyama.com/recycle for monitor recycling.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS ENGLISH Touch Screen Technology Projected Capacitive 50points*1 Light transmission 80% min. Hardness 6H Thickness 5mm Communication system USB serial transfer Size Category LCD Panel 65" Panel technology IPS Size Diagonal: 65" (165cm) Pixel pitch Contrast ratio 0.372mm H × 0.
Operating: Environmental Considerations Approvals Temperature 0 to 40°C / 32 to 104°F Humidity 85% (No condensation) Storage: Temperature -20 to 60°C / 4 to 140°F Humidity 85% (No condensation) CE, TÜV-Bauart, CU, IPX1*3 ENGLISH NOTE *1 Windows OS application software have a limited touch pts. (max. 10pts only) *2 USB peripherals / Audio equipment are not connected. *3 IPX1 Standard Compliant : Only front face *4 Not support HDCP2.2. DIMENSIONS 4xM8 SCREW HOLE (VESA MOUNT) 400.0mm/15.7” 200.0mm/7.
COMPLIANT TIMING VGA 640 × 480 Horizontal Frequency 31.469kHz SVGA 800 × 600 37.879kHz 60.317Hz 40.000MHz XGA 1024 × 768 48.363kHz 60.004Hz 65.000MHz WXGA 1366 × 768 47.712kHz 59.790Hz 85.500MHz Video Mode ENGLISH VESA Vertical Frequency 59.940Hz 25.175MHz Dot Clock SXGA 1280 × 1024 63.981kHz 60.020Hz 108.000MHz Full HD 1920 × 1080 67.500kHz 60.000Hz 138.500MHz WUXGA 1920 × 1200 74.038kHz 59.950Hz 154.000MHz WQHD 2560 × 1440 88.787kHz 59.951Hz 241.500MHz * 67.
