USER MANUAL ENGLISH DEUTSCH FRANCAIS Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further ENGLISH development of environmentally adapted electronics products.
Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances.
FCC DECLARATION OF CONFORMITY Model Number: Trade Name: PL1900 iiyama Responsible party: Address: Telephone number: IIYAMA North America, Inc. 65 West Street Road, Suite 101B, Warminster, PA 18974 U.S.A. 215-682-9050 ENGLISH This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
TABLE OF CONTENTS SPECIAL NOTES ON LCD MONITORS ............................................. 3 CUSTOMER SERVICE ...................................................................... 3 CLEANING ....................................................................................... 3 BEFORE YOU OPERATE THE MONITOR ................................................ 4 CHECKING THE CONTENTS OF THE PACKAGE ............................. 4 HOW TO USE THE STAND ......................................................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE ENGLISH If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION the cables and possibly cause injury. MAINTAIN GOOD VENTILATION Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire.
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.
BEFORE YOU OPERATE THE MONITOR FEATURES 48.1cm (19.
HOW TO USE THE STAND The monitor is the design that a stand rotate.Be sure to rotate the stand before opearating the monitor, and rotate the stand upward before you re-box the monitor. CAUTION Install the Stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. ENGLISH Unplug the monitor before installation to avoid electric shock or damage. 1.
ENGLISH CONTROLS AND CONNECTORS FRONT PANEL CONTROL 7 6 5 1 2 3 4 8 9 10 11 12 A Menu Button ( 1 ) B Scroll Down / Brightness Button ( C Scroll Up / Contrast Button ( ) ) D Select / Auto Button ( 2 ) E Power Indicator NOTE Green: Normal operation Orange: Power Management The monitor enters into power management mode which reduces the power consumption to less than 1W when receiving no horizontal and/or vertical sync signal.
CONNECTING YOUR MONITOR A Ensure that both the computer and the monitor are switched off. B Connect the computer to the monitor with the signal cable.(See page 22 for CONNECTOR PIN ASSIGNMENT.) C Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. D Connect the Power Cable to the monitor first and then to the power supply. ENGLISH NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 21: COMPLIANT TIMING. Windows 95/98/2000/Me/XP Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on For installation on Windows 95/98/2000/Me/XP: The monitor Information File for iiyama monitors may be necessary for your computer and obtained via the Internet, using the address: http://www.iiyama.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 21. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 13 for SCREEN ADJUSTMENTS. ( Press the Menu Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the Main Menu AUTO ENGLISH SET ? / Buttons.
ADJUSTMENT MENU CONTENTS Auto Adjust AUTO SET Auto Adjust Adjustment Item Auto Adjust * Problem / Option Direct Button to Press Adjust H. / V. Position, H.Size and Fine Tune automatically. NOTE * The screen becomes dark for approximately five seconds during the adjustment. For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 13 for SCREEN ADJUSTMENTS.
Color Adjust Color Adjust Adjustment Item Problem / Option 9300K Bluish white 6500K Reddish white 5400K Greenish white 2 User Color ENGLISH R (Red) G (Green) B (Blue) Information i Information H.Frequency: V. Frequency: P i xe l C l o ck : Resolution: Model Number: Serial No: 70.64 kHz 74.98 Hz 136.
? Setup Menu Adjustment Item Language Select Resolution Notice OSD NOTE Problem / Option English Français Deutsch Español Italiano Disable Button to Press English Suomi French German Spanish Italian The massege is turned off. Finnish Japanese Traditional Chinese Simplified Chinese The message of "For best picture quality change resolution to 1440x900" appears on the screen every 30 seconds when displaying less than 1440x900. Enable H. OSD is too far to the left OSD is too far to the right V.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. The monitor is designed to provide the best performance at resolution of 1440 × 900, but can not provide the best at resolutions of less than 1440 × 900 because the picture is automatically stretched ENGLISH to fit the full screen.
C Press the Auto Button. (Auto Adjust) D Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH E Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. F 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
G Adjust the Fine Tune to correct horizontal wavy noise, flicker or blur in the zebra pattern. ENGLISH NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps F and NOTE G because the H.Size may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again. Adjust the H.Position after the Fine Tune adjustment if the horizontal position moves during the adjustment.
POWER MANAGEMENT FEATURE The power management feature of this product complies with power saving requirement of ENERGY STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. ENGLISH 3.
Problem Check The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The Mute is OFF. The audio output level of the audio equipment is within the specification of the monitor. G The sound is too loud or too quiet. The audio output level of the audio equipment is within the specification of the monitor. H A strange noise is heard. The Audio Cable is properly connected. ENGLISH F No sound.
APPENDIX SPECIFICATIONS Model ENGLISH LCD Panel ProLite E1900WS-1 Driving system a-Si TFT Active Matrix Size Diagonal: 48.1cm / 19.0" Pixel pitch 0.2835mm H × 0.2835mm V Brightness 300cd/m2 (Typical) Contrast ratio 700 : 1 (Typical) Viewable angle Right / Left : 75 degrees each, Up:75 degrees, Down: 65 degrees (Typical) Response time 5ms (Black, white, black) Display Colors Approx.16.2M (6bit+2bit ditherring) Sync Frequency Horizontal: 30.0-80.
ProLite E1900WS-2 a-Si TFT Active Matrix Size Diagonal: 48.1cm / 19.0" Pixel pitch 0.2835mm H × 0.2835mm V Brightness 300cd/m2 (Typical) Contrast ratio 700 : 1 (Typical) Viewable angle Right / Left : 75 degrees each, Up:75 degrees, Down: 65 degrees (Typical) Response time 5ms (Black, white, black) Display Colors Approx.16.2M (6bit+2bit ditherring) Sync Frequency Horizontal: 30.0-80.0kHz, Vertical: 50-75Hz Dot Clock 137MHz maximum Maximum Resolution 1440 × 900, 1.
DIMENSIONS DIMENSIONS 71mm/2.8" ENGLISH 379.5mm/15.2" 321mm/12.8" 202.5mm/8.1" 443mm/17.7" 231mm/9.2" COMPLIANT TIMING Video Mode VESA VGA 640 × 480 SVGA 800 × 600 XGA 1024 × 768 WXGA 1280 × 768 SXGA 1280 × 1024 WXGA+ 1440 × 900 VGA TEXT Macintosh NOTE 21 1280 × 720 720 × 400 640 × 480 832 × 624 * DVI input is not compliant. APPENDIX Horizontal Frequency Vertical Frequency Dot Clock 31.468kHz 37.500kHz 35.156kHz 37.878kHz 46.875kHz 48.076kHz 48.362kHz 56.474kHz 60.024kHz 47.
CONNECTOR PIN ASSIGNMENT Connector DVI-D 24pin Connector 1 8 16 24 9 17 DVI-D Pin Input Signal Input Signal Pin 1 Red video 9 +5V 2 Green video 10 Ground 3 Blue video 11 NC 4 NC 12 Data line (SDA)* 5 Ground 13 H-Sync 6 Red video ground 14 V-Sync 7 Green video ground 15 Clock line (SCL)* 8 Blue video ground * Compliant to VESA DDC. Pin Input Signal Input Signal Pin 1 T.M.D.S Data 2– 13 2 T.M.D.S Data 2+ 14 +5V 3 T.M.D.
