USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2004/108/EC “EMC Directive”, 2006/95/EC “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
TABLE OF CONTENTS FOR YOUR SAFETY............................................................................1 SAFETY PRECAUTIONS................................................................1 SPECIAL NOTES ON LCD MONITORS .........................................3 ENGLISH CUSTOMER SERVICE ...................................................................3 CLEANING ......................................................................................3 BEFORE YOU OPERATE THE MONITOR ....................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. ENGLISH DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1920 × 1080 High Contrast 1000:1 (Typical), Adv.
WALL MOUNTING When you use with the wall mounting, in consideration of thickness of the mounting WARNING stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor. Please check if the wall or ceiling can support the weight of the monitor before mounting it.
FITTING AND REMOVAL OF BASE ENGLISH CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. A Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
ENGLISH CONTROLS AND CONNECTORS Power Switch ( ) Power Indicator Normal operation NOTE Blue: Orange: Power Management Select / Input select Button ( ) Scroll up / Audio Adjust Button ( ) Scroll down / i-Style Mode Button ( Menu Button ( ) ) Speakers VGA(D-sub) mini 15pin Connector (VGA) DVI-D 24pin Connector (DVI) Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor from being removed without your permission.
CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power supply. Turn on your monitor and computer. ENGLISH NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 26: COMPLIANT TIMING. For optimal viewing it is recommended to look at the full face of the monitor. Hold the stand so that the monitor does not topple when you change the monitor’s angle. You are able to adjust the monitor’s angle up to 20 degrees upward and 2 degrees downward.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 26. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 19 for SCREEN ADJUSTMENTS. Press the Button to start the On Screen Display (OSD) feature. There are / Buttons.
ADJUSTMENT MENU CONTENTS Picture Adjust Picture Adjust Problem / Option Button to Press Contrast *3 Too dull Too intense Brightness *1,2,3 Too dark Too bright Over Drive Off / -2 / -1 / 0 / +1 / +2 It will improve the gray level response time of the LCD panel. A higher level results in a faster response time. Adv. Contrast *2,4,5 ECO Mode * 3 Off Typical Contrast Ratio On Increased Contrast Ratio Off Normal 1 Brightness of back-light is reduced.
Input Select Direct Adjustment Item Input Select Problem / Option VGA DVI HDMI Input Select ENGLISH Auto NOTE Button to Press Select the VGA input. Select the DVI input. Select the HDMI input. Search for an available input source and select automatically. Input source is fixed, not selected automatically when VGA, DVI and HDMI which are selected. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations.
Store User Setting Adjustment Item Memorize Settings Problem / Option Button to Press User Mode 1 Save the settings of the screen adjustment. User Mode 2 Save the settings of the screen adjustment. User Mode 3 Save the settings of the screen adjustment. You can memorize your customized monitor settings. The following settings can be memorized: Contrast, Brightness, Over Drive, Adv.
Manual Image Adjust Adjustment Item Manual Image Adjust Problem / Option Off Sport Game i-Style Mode is turned Off. For general windows environment and monitor default setting. For Sports game environment. FPS Game For FPS game environment. ENGLISH Standard i-Style Mode *5 Direct Button to Press Strategy Game For Strategy game environment. For text editing and viewing in a word Text processing environment. User Mode 1 Applies customized monitor settings.
*1 *2 *3 *4 Only Analog Input. See page 19 for SCREEN ADJUSTMENTS. Video Mode Adjust is disabled when displaying 1920 x 1080 144Hz timing. It can display in the center of the screen with a 4:3, 5:4 or 16:10 aspect ratio when input video resolution is 4:3, 5:4 or 16:10. *5 i-Style Mode is disabled when Blue Light Reducer is activated. *6 Blue Light Reducer is disabled when i-Style Mode is activated.
Setup Menu Setup Menu Adjustment Item ENGLISH Language Select Problem / Option English Français Deutsch Nederlands Polski English French German Dutch Polish H.Position OSD is too left OSD is too right V.Position OSD is too low OSD is too high Button to Press Русский Russian Japanese Simplified Chinese Traditional Chinese OSD Position You can set the OSD display duration time. 5 / 15 / 30 / 60 seconds OSD Time Out OSD Background*1 Retune the background of OSD.
Information Information Displays information regarding the current input signal coming from the graphic card in your computer. Information 1920x1080 H.Frequency: V.Frequency: 67.56KHz 60.0Hz Pixel Clock: 148.5MHz Model Number: GE2488HS 1:Exit NOTE See your graphic card user guide for more information about changing the resolution and refresh.
● Lock Mode 1. The OSD lock will be activated by pressing the front buttons and If you try to access the OSD by pressing any of the buttons , , Locked" will appear on the screen. and 2. The OSD lock will be deactivated by pressing the front buttons for about 10 seconds. and , message "OSD again for 10 seconds. ENGLISH 1. The power switch lock will be activated by pressing the front buttons and for 10 seconds.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use.
C Pressing and holding of the Button for about 2 seconds. (Auto Image Adjust) D Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Image Adjust. ENGLISH E Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. F 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps F and G because the Clock may not be adjusted correctly. If the flicker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again. Adjust the H.Position after the Phase adjustment if the horizontal position moves during the adjustment. H Adjust the Brightness and Color to get the desired picture after you complete the Clock and Phase adjustments.
POWER MANAGEMENT FEATURE ENGLISH The power management feature of this product complies with power saving requirement of ENERGY STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below.
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. Problem Check The picture does not appear. (Power indicator The Power Cable is firmly seated in the socket.
ENGLISH Problem Check No sound. The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The Mute is OFF. The audio output level of the audio equipment is within the specification of the monitor. The sound is too loud or too quiet. The audio output level of the audio equipment is within the specification of the monitor. A strange noise is heard. The Audio Cable is properly connected.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS Size Diagonal: 24" (61cm) Pixel pitch 0.277mm H × 0.277mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 85 degrees each, Up / Down: 80 degrees each (Typical) Response time 5ms (Typical), 1ms (Gray to Gray) Approx.16.7M Display Colors Sync Frequency Analog : Horizontal: 30.0-80.
DIMENSIONS 568.0mm/22.4” 533.5mm/21.0” 217.5mm/8.6” 409.0mm/16.1” 301.0mm/11.9” 335.5mm/13.2” 51.0mm/2.0” ENGLISH 289.5mm/11.4” COMPLIANT TIMING Horizontal Frequency Vertical Frequency Dot Clock 31.469kHz 59.940Hz 25.175MHz 37.500kHz 75.000Hz 31.500MHz 37.861kHz 72.809Hz 31.500MHz 35.156kHz 56.250Hz 36.000MHz 37.879kHz 60.317Hz 40.000MHz 46.875kHz 75.000Hz 49.500MHz 48.363kHz 60.004Hz 65.000MHz 56.476kHz 70.069Hz 75.000MHz 60.023kHz 75.029Hz 78.750MHz 63.981kHz 60.
