USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
Congratulations! for Sustainable IT TCO Certified is an international third party sustainability certification for IT products. TCO Certified ensures that the manufacture, use and recycling of IT products reflect environmental, social and economic responsibility. Every TCO Certified product model is verified by an accredited independent test laboratory.
CE MARKING DECLARATION OF CONFORMITY This LCD monitor complies with the requirements of the EC/EU Directive 2004/108/EC “EMC Directive”, 2006/95/EC “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
TABLE OF CONTENTS FOR YOUR SAFETY............................................................................1 SAFETY PRECAUTIONS................................................................1 SPECIAL NOTES ON LCD MONITORS .........................................3 CLEANING ......................................................................................3 BEFORE YOU OPERATE THE MONITOR ..........................................4 FEATURES................................................................
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. ENGLISH DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located.
SPECIAL NOTES ON LCD MONITORS NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
BEFORE YOU OPERATE THE MONITOR FEATURES Supports Resolutions up to 1600 × 900 High Contrast 1000:1 (Typical), Adv.
WALL MOUNTING When you use with the wall mounting, in consideration of thickness of the mounting WARNING stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor. Please check if the wall or ceiling can support the weight of the monitor before mounting it.
FITTING AND REMOVAL OF BASE : ProLite B2083HSD CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. ENGLISH A Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
FITTING AND REMOVAL OF BASE : ProLite E2083HSD / ProLite E2083HD CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before removal or installation to avoid electric shock or damage. ENGLISH A Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
ENGLISH CONTROLS AND CONNECTORS : ProLite B2083HSD Power Indicator NOTE Blue: Normal operation Orange: Power Management Power Switch ( ) Menu / Select Button (MENU) Scroll Up / Volume Button ( / Scroll Down / ECO Mode Button ( ) / ) Exit Button (EXIT) Auto Button (AUTO) Speakers VGA(D-sub) mini 15pin Connector (D-SUB) DVI-D 24pin Connector (DVI-D) Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor from being removed without your permissio
ENGLISH CONTROLS AND CONNECTORS : ProLite E2083HSD / ProLite E2083HD Power Indicator NOTE Blue: Normal operation Orange: Power Management Power Switch ( ) Menu / Select Button (MENU) Scroll Up / Volume * Button ( / ) Scroll Down / ECO Mode Button ( / ) Exit Button (EXIT) Auto Button (AUTO) Speakers * VGA(D-sub) mini 15pin Connector (D-SUB) DVI-D 24pin Connector (DVI-D) Keyhole for Security Lock NOTE You can fasten a security lock and cable to prevent the monitor from being removed
CONNECTING YOUR MONITOR : ProLite B2083HSD ENGLISH Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the monitor first and then to the power supply. Turn on your monitor and computer. NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used.
CONNECTING YOUR MONITOR : ProLite E2083HSD / ProLite E2083HD NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 30: COMPLIANT TIMING. ENGLISH ADJUSTING THE VIEWING ANGLE : ProLite E2083HSD / ProLite E2083HD For optimal viewing it is recommended to look at the full face of the monitor. Hold the stand so that the monitor does not topple when you change the monitor’s angle. You are able to adjust the monitor’s angle up to 22° upward, 5° downward.
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B2083HSD For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to your own preference. Hold the panel so that the monitor does not topple when you change the monitor’s height or angle. 130mm ENGLISH You are able to adjust the monitor's height up to 130mm, angle up to 45 degrees right and left, 22 degrees upward and 5 degrees downward.
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 30. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 20 for SCREEN ADJUSTMENTS. Press the ENTER Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the / Buttons.
ADJUSTMENT MENU CONTENTS Auto Adjust Only Analog Input Auto Adjust * Direct Problem / Option Button to Press Adjust H. / V. Position, Pixel Clock and Phase automatically. * For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 20 for SCREEN ADJUSTMENTS. Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. Auto Adjust : Press the Auto Button when the Menu is not displayed.
Geometry Only Analog Input ENGLISH Adjustment Item Problem / Option H. Position Too left Too right V. Position Too low Too high Pixel Clock Too narrow Too wide Phase Button to Press To correct flickering text or lines Color Adjustment Item Problem / Option 9300K Bluish white 7500K Yellowish white 6500K Reddish white Red User Preset Green Blue Button to Press Too weak Too strong OSD Adjustment Item Problem / Option Button to Press H.
Language Language Problem / Option English Français Deutsch Italiano Polski English French German Italian Polish Button to Press Español Nederlands Spanish Dutch Japanese Simplified Chinese Russian ENGLISH Adjustment Item Recall Adjustment Item Problem / Option Button to Press Yes Factory-preset data is restored. No Return to Menu.
Miscellaneous Adjustment Item Problem / Option Button to Press 12345 ENGLISH Sharpness You can change the picture quality from 1 to 5 (sharp to soft). Press the Button to change the picture quality in numerical order. Press the Button to change the picture quality in reverse numerical order. On DDC/CI is turned ON. Off DDC/CI is turned OFF. DDC/CI NOTE DDC/CI On and Off are switched as follows by pressing the On Off Button successively.
Input Select Adjustment Item Input Select Problem / Option Direct Button to Press Select the Analog input. Select the Digital (DVI) input. D-sub DVI Direct You can skip the Menu items and display an adjustment scale directly by using the following button operations. Input Select : Pressing and holding of the AUTO Button for 2-3 seconds when the Menu is not displayed. Audio* Adjustment Item Volume Problem / Option Button to Press Too soft Too loud On Turn off the sound temporarily.
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. ENGLISH The monitor is designed to provide the best performance at resolution of 1600 × 900, but can not provide the best at resolutions of less than 1600 × 900 because the picture is automatically stretched to fit the full screen.
Press the AUTO Button. (Auto Adjust) Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. ENGLISH Adjust the V.Position so that the top and bottom of the picture frame will fit to the display area. 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.
ENGLISH Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern. NOTE and In case the strong flicker or blurs remain on a part of the screen, repeat steps because the Pixel Clock may not be adjusted correctly. Adjust the H.Position after the Phase adjustment if the horizontal position moves during the adjustment. Adjust the Brightness and Color to get the desired picture after you complete the Pixel Clock and Phase adjustments. Put back your favorite wallpaper.
POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor enters into Power Management Mode which reduces the power consumption to less than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power Management Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again. Power Indicator NORMAL MODE POWER MANAGEMENT MODE Blue Orange POWER 0 0.
TROUBLE SHOOTING ENGLISH If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. 3.
Check The screen is shaking. The power voltage is within the specification of the monitor. The signal timing of the computer is within the specification of the monitor. No sound. The audio equipment (computer etc.) is ON. The Audio Cable is properly connected. The Volume is turned up. The Mute is OFF. The audio output level of the audio equipment is within the specification of the monitor.
APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS : ProLite B2083HSD Size Category ENGLISH LCD Panel 20" Panel Technology TN Size Diagonal: 19.5" (49.4cm) Pixel pitch 0.271mm H × 0.271mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 85 degrees each, Up / Down : 80 degrees each (Typical) Response time 5ms (Typical) Display Colours Approx. 16.
SPECIFICATIONS : ProLite E2083HSD Size Category 20" Panel Technology TN Size Diagonal: 19.5" (49.4cm) Pixel pitch 0.271mm H × 0.271mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 85 degrees each, Up / Down : 80 degrees each (Typical) Response time 5ms (Typical) Display Colours Approx. 16.7M Sync Frequency Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz Maximum Resolution 1600 × 900, 1.
ENGLISH SPECIFICATIONS : ProLite E2083HD Size Category 20" LCD Panel Diagonal: 19.5" (49.4cm) Panel Technology TN Size Pixel pitch 0.271mm H × 0.271mm V Brightness 250cd/m2 (Typical) Contrast ratio 1000 : 1 (Typical), Adv. Contrast Function Available Viewable angle Right / Left : 85 degrees each, Up / Down : 80 degrees each (Typical) Response time 5ms (Typical) Display Colours Approx. 16.7M Sync Frequency Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz Maximum Resolution 1600 × 900, 1.
DIMENSIONS : ProLite B2083HSD 469.5mm/18.5” 435.5mm/17.1” 250.0mm/9.8” ENGLISH ( 230.0mm/9.1” 238.0mm/9.4” 277.5mm/10.9” 356.5mm/14.0”(486.5mm/19.2”) 393.5mm/15.5” 59.5mm/2.3” ) : Maximum adjustment range DIMENSIONS : ProLite E2083HSD / ProLite E2083HD 469.5mm/18.5” 435.5mm/17.1” 203.0mm/9.1” 360.0mm/14.2” 238.0mm/9.4” 277.5mm/10.9” 59.5mm/2.3” 238.0mm/9.
COMPLIANT TIMING Video Mode ENGLISH VESA VGA TEXT VGA 640 × 480 SVGA 800 × 600 XGA 1024 × 768 SXGA 1280 × 1024 HD+ 1600 × 900 640 × 350 720 × 400 Horizontal Frequency 31.469kHz 37.500kHz 37.879kHz 46.875kHz 48.363kHz 60.023kHz 63.981kHz 79.976kHz 55.540kHz 31.469kHz 31.469kHz Vertical Frequency 59.940Hz 75.000Hz 60.317Hz 75.000Hz 60.004Hz 75.029Hz 60.020Hz 75.025Hz 60.000Hz 70.087Hz 70.087Hz Dot Clock 25.175MHz 31.500MHz 40.000MHz 49.500MHz 65.000MHz 78.750MHz 108.000MHz 135.000MHz 97.
