IISonic LCD Monitor Series User’s Manual IIMJ7
◇ Notice ‧ All Information in this manual may change from time to time without prior notice. ‧ To ensure safety operation of this product, please read the following menu carefully before using this product. ◇ ‧ ‧ ‧ ‧ Safety Information ◇ ‧ ‧ ‧ ‧ Precaution Do not place anything wet on the monitor or the power cord. Be sure to turn the monitor off before plugging the power cord into the socket. Be sure to check the power cord and the other cords are securely and rightly connected.
Hardware Installation Be carefully to your LCD monitor, it’s very exquisite but easy to broken. Turn off LCD’s and PC’s power before you set it up. Follow our installation step by step. Input [1] [2] [3] 【1】DC port：This is for connecting the power cable. 【2】PC In : This can be connected with the D-Sub 15 pin signal Cable. 【3】Audio In：This can be connected to the PC audio-out connector of sound resource.
OSD (On-Screen Display) Menu Mode Press the OSD button to access menu, and press Increase / Decrease button for adjustment.
Troubleshooting Make sure that your monitor is properly installed if you have encountered any trouble using this product. ˙ There is no picture on the screen. Check: 1.Power saving mode. Press any key and move the mouse to deactivate the mode. 2.Signal cable connector pins. If there are bent or missing pins, consult your place of purchase. ˙ Characters look too dark or too light Check: Using OSD Menu to adjust the Brightness.
1610MJ7AGN01 V1.
