Use and Care Manual

9
REVERSING THE DOOR
No.
Description
Qty
No. Description Qty
1 Top cover screw 2 7 Limit block 1
2 Top cover 1 8 Door screw 1
3 Left upper hinge 1 9 Bottom hinge 1
4 Left upper hinge screw 1 10 Bottom hinge screw 2
5 Upper hinge screw 3 11 Short front foot 1
6 Right upper hinge 1 12 Long front foot 1
Figure 1
Remove top cover screw ①.
Push the rear of the top cover up above the top of the wine cooler and then push it
forward to remove it.
Figure 2
Remove the upper hinge screws and the right-upper hinge ⑥.
Caution: Protect the cooler door and ensure that it does not fall and get damaged.