Use and Care Manual

8
PRODUCT DIMENSIONS
Your appliance should be installed on a flat and even floor.
Keep the appliance level by adjusting the front leg levers.
Dimensions and Clearances
Check the dimensions of the appliance and the installation path to ensure there is sufficient
room to move the appliance through doors or narrow openings.
The installation location chosen for the appliance should allow space behind the unit for
connections and airflow as well as space in front to open the doors.
Too small of a distance from adjacent items may result in reduced cooling capability and
increased power consumption. Allow at least 20 inches in front of the appliance to open the
doors, and at least 2" clearance between the back of the appliance, sides and wall.
Levelling
The appliance has two front leveling legs. Adjust the legs to alter the tilt from front-to back or
side-to side. If the appliance seems unsteady, or the door does not close easily, adjust the
appliance's tilt using the instructions below:
1. Turn the leveling leg counterclockwise to raise that side of the appliance or clockwise to
lower it. It may take several turns of the leveling leg to adjust the height of the appliance.
2. Open the door and check to make sure that it closes easily. If the door does not close
easily, tilt the appliance slightly more to the rear by turning both leveling legs
counterclockwise. It may take several more turns.
Positioning the Appliance
Arrange the appliance so that it does not vibrate against adjoining surfaces or against the wall.
Be sure to maintain a 2” clearance between the back of the appliance, sides and wall.