Installation Guide

UNPACK CHOOSE LOCATION
LEVEL LEGS
Remove the Packaging
• Remove tape and any temporary labels from your
refrigerator before use. Do not remove any
warning labels, the model and serial number
labels, or the circuit diagram.
• Carefully remove the protective plastic film on the
doors and refrigerator body.
• If required, carefully use tweezers or other small
instruments to start the peeling at the corners.
Appliance Location
• To avoid noise and vibration, the appliance must
be installed and leveled on a solidly constructed
floor. If required, adjust the leveling legs to
compensate for the unevenness of the floor.
• Keep away from heat and avoid direct sunlight.
• Do not place the appliance in humid or watery
places to prevent corrosion or reduced insulation
efficiency.
• Ensure that the appliance is placed in a well-
ventilated indoor location.
Note: Installation on carpeting, soft tile surfaces, a
platform or weakly supported structure is not
recommended. Surface shall be flat and sturdy (rotate
left and right to adjust the wheel for levelling if
unsteady).
Ensure that there is enough space around the
appliance, as indicated in diagram (pg. 10), to allow
for proper ventilation.
INSTALLATION INSTRUCTIONS
9