Installation Guide

TROUBLESHOOTING
• Ambient temper
ature too high.
• Door opened fr
equently or for too long.
• Door not closed properly (misaligned, damaged
or dirty door seals).
• Large load of food added at once.
• Temperature sensor blocked by food, preventing
proper air circulation.
• Ensure recommended clearances are adhered to.
• Ensure there is adequate air circulation behind
the appliance.
• Ensure that the appliance is plugged in and ther
e
is power in the outlet.
• Confirm that circuit breaker or fuse has not
tripped.
• Door opened too frequently or for too long.
• Warm
food placed in refrigerator.
• Food placed against back wall of refrigerator.
• Poor door sealing.
• Door seal damaged or dirty, replace or clean seal.
• Extremely humid environment.
• Door opened too frequently or for too long.
• Door not c
losed properly.
• Poor door sealing.
• Door seal damaged or dirty, replace or clean seal.
• Extremely humid environment.
• Check and clean the door gasket regul
arly to
e
n
s
u
r
e
tha
t
there is no debris on it.
• Clean door gaskets an
d contact surfaces with mild
soap and warm water.
• Call a service technician. Do not attempt to repair
this yours
elf as there is danger of making contact
with high voltage.
For other troubleshooting inquiries or for an iio™ authorized repair center please contact us at:
1-833-446-4461 or email us at [e-mail].
Possible Cause or Remedy
Problem
Appliance is connected but does
not work:
Cooling system operates
continuously for extended periods
of time:
Excessive ice build up on the
back wall:
(Note: some moisture buildup is normal)
Ice or frost build up in the freezer:
Door will not close:
Door difficult to open:
LED lighting does not work:
21