Installation Guide

Dimensions and Clearances
• Check the dimensions of
the appliance and the installation path to
ensure there is sufficient room to move the appliance through
doors or narrow openings.
• The installation location chosen for the appliance should allow
space behind the unit for connections and airflow as well as space
in front to open the doors.
• Too small of a distance from adjacent items may result in reduced
cooling and freezing capability and increased power
co
nsumption. Allow at least 29 1/8” inches (740 mm) in front of
the appliance to open the doors, and at least 2 inches (50 mm)
between the back of the appliance and the wall.
1.
Levelling
The refrigerator has two front leveling legs. Adjust the legs to alter
the tilt from front-to back or side-to side. If the refrigerator seems
unsteady, or the doors do not close easily, adjust the refrigerator’s
tilt using the instructions below:
2.2.
Turn the leveling leg counter-clockwise to raise that side of the
refrigerator or clockwise to lower it. It may take several turns
of the leveling leg to adjust the height of the appliance.
Open the door and check to make sure that it closes easily. If
the door does not close easily, tilt the refrigerator slightly more
to the rear by turning both leveling legs counter-clockwise. It
may take several more turns.
Positioning the Refrigerator
Arrange the refrigerator so that it does not vibrate against
adjoining surfaces or against the wall. Be sure to maintain a 2”
clearance behind the refrigerator for proper ventilation.
11