User's Guide

II-VI Incorporated
375 Saxonburg Boulevard
Saxonburg, PA 16056
T. 724.352.4455 | F. 724.352.5284 | www.ii-vi.com
• Click “Save and Apply” at the lower right corner to save password.
• Click “xmf-h Web Panel”, upper right corner, to return to the main GUI window.
5. Click NETWORK SETTINGS tab.
6. Click Network tab.
7. Select Station Mode.
8. Choose the “Detected WIFI network” and enter the password (network password).
9. Click CONFIGURE & RESTART.
10. Unit will take approximately 1 minute to go into a configuration and reboot.
11. Click on the wireless access point and choose the network that the unit was added to.
12. Log in to the network router to obtain the IP address by cross referencing the unit’s MAC
address. It’s should be under Connected Device.
13. The unit is now joined in the network.