User's Guide

II-VI Incorporated

375 Saxonburg Boulevard

Saxonburg, PA 16056

T. 724.352.4455 | F. 724.352.5284 | www.ii-vi.com

3 Network Setting

This unit is configured in AP mode when it’s arrived. User may set it to Station Mode to add it to their

network. This section describes the step to change the network setting to Station Mode.

1. Power up the unit and allow the boot to complete.

Note: It takes approximately 35 seconds to boot up.

2. Click on the wireless access point and choose “XMF-H_{MAC_Address}” to connect to its WIFI.

3. Open Chrome browser and enter http://192.168.100.1 to access to the GUI

Password: password [Default: 8n"iUN5BiL+i]

4. User may choose to change its password by clicking the OpenWrt link.

• Log in with credential in Step #3.

• Click System tab then click Administration tab.

• Set new password and confirm new password.