User's Guide

II-VI Incorporated
375 Saxonburg Boulevard
Saxonburg, PA 16056
T. 724.352.4455 | F. 724.352.5284 | www.ii-vi.com
• Select the OTDR from the instrument dropdown box. Then select (otdr_get_params,
ver, OTDR_ON, OTDR_OFF etc.) command from command dropdown box as shown
below:
o Click on Submit Button.
o You will now see response of selected command.
• Select the OSA from the instrument dropdown box. Then select any from (PWR_off,
CTM_reset, PWR_on etc.) command from command dropdown box.
o Click on Submit Button.
• Select the OCC from the instrument dropdown box. Then select (OCC) command from
command dropdown box and click on Submit Button.
• Select the SFP from the instrument dropdown box. Then select (SFP) command from
command dropdown box and click on Submit Button.
• Select the OTHER from the instrument dropdown box. Then select (ADC128D181)
command from command dropdown box and click on Submit Button.
6.5 FREESCALE KL02 FLASHER APPLICATION
Freescale KL02 is setup by init script on XMFH Boot time. In order to upgrade Freescale firmware, flasher
application is included. It halts the execution, erases the chip, writes new firmware and resets Freescale
KL02. Issue following command with firmware bin file name to upgrade.
root@xmf-h:~# kl02-flasherapp firmware.bin