User's Guide

II-VI Incorporated
375 Saxonburg Boulevard
Saxonburg, PA 16056
T. 724.352.4455 | F. 724.352.5284 | www.ii-vi.com
6.4 XMF-H WEB UI
This section provides steps to use Web UI for communication with instruments of XMF-H.
1. To open Web UI, open chrome browser. Then, enter URL http://IP-ADDRESS
• Ex: http://10.1.10.184 (if in Station mode) or
Ex: http://xmf-h.local or http://192.168.100.1 (if in AP mode)
Find out IP address from System information tab as shown in SECTION 3 or by issuing
“ifconfig” command on Serial interface console.
The Web UI appears as shown below:
2. Click on “Network Settings” from left side navigation menu to configure the network related
settings of your board as shown below